Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Tue May 13, 2025 5:47 pm

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 62 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 11:01 am 
Offline

Joined: Sat Feb 13, 2016 5:39 pm
Posts: 213
JohnB wrote:
Can someone do the stress analysis?

If you were serious about getting it to Pima, how about landing it on grass...or even a well-foamed runway at D-M?
Strip it down, use minimal fuel. Land at Lake TR and defuel if need be.

I have heard tales of Amphibs landing gear up with no damage...except maybe shaving a 1/4 inch off the keel.
Since it wouldn't fly again, not much to loose structure wise...and arguably better for it than dismantling it at a remote (non-equipped) site and breaking it down into small enough pieces for road transport journey of 140 miles.



This is quite possibly the stupidest comment that i can recall in recent history........wow.....


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 11:31 am 
Offline
User avatar

Joined: Fri Mar 23, 2012 6:20 pm
Posts: 321
It would be a very dangerous undertaking to land a flying boat on land but it has been done.
Sunderland 'M' flying too low during a flying display at the opening of Rongotai airport. Wellington.
The pilot scraped the hull on the tarmac but landed safely at RNZAF Station Hobsonville.

Image
And a Dornier 18 used to escape the advancing Russians and landed in a field in American/British occupied territory
Image

_________________
When I was young "sex was safe & flying was dangerous".


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 12:13 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Fri Apr 30, 2004 7:13 pm
Posts: 5663
Location: Minnesota, USA
Since it's not uncommon for seaplanes to land on grass strips (getting them off the water before winter freeze), I'd be interested in hearing an explanation as to the great danger of landing a flying boat the same way.

Just a few examples of many on youtube:


https://www.youtube.com/watch?v=Wg323O2ebps

https://www.youtube.com/watch?v=MR483bK_6Js

https://www.youtube.com/watch?v=6_xzFDTne2E

_________________
It was a good idea, it just didn't work.


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 2:58 pm 
Offline
1000+ Posts!
1000+ Posts!

Joined: Sun Nov 15, 2009 12:40 pm
Posts: 1471
Dan K wrote:
Since it's not uncommon for seaplanes to land on grass strips (getting them off the water before winter freeze), I'd be interested in hearing an explanation as to the great danger of landing a flying boat the same way.


Even if it could be done you will not find any grass within 500 miles of Tucson save for the occasional golf course.


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 3:43 pm 
Offline

Joined: Sat Feb 07, 2009 12:05 pm
Posts: 913
Location: ELP
In 1944 a PBM landed on the Willcox Playa, which is about 80 miles west of Tucson. I would not really expect that to be done with the Mars, but it is fun to think about: https://www.aerospacearchaeology.com/pb ... -1944.html

_________________
Had God intended for man to fly behind inline engines, Pratt & Whitney would have made them.

CB

http://www.angelfire.com/dc/jinxx1/Desrt_Wings.html


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sat Aug 14, 2021 8:39 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Wed Jan 19, 2011 12:27 am
Posts: 5595
Location: Eastern Washington
Mick G wrote:

This is quite possibly the stupidest comment that i can recall in recent history........wow.....



It's nice to have a fan.

Tell me, what is so stupid about it?

-Landing a flying boat on land, which any amount of research will tell you has been done before (see the posted photos)...
-or my assertion/question that it would not likely cause any damage...
-or my skepticism about the feasibility landing it at a remote lake, dismantling it and trucking the pieces 140 miles through the desert?

Try reading my comment carefully, I was asking whether it could be done, asking others here about the feasibility of it.

What's with the insult?
If you don't like the idea say so, but calling my asking the question stupid doesn't speak well for you.

Since you seem to be smarter than the rest of is, please give us your expert opinion or suggestion.
It's easy to call names from the cheap seats, let's hear your solution.

Like it or not, your the Navy doesn't want it, Pima might be the best place for the aircraft...any plan that gets it there beats sitting in a remote part of B.C. or facing the scrapper.

_________________
Remember the vets, the wonderful planes they flew and their sacrifices for a future many of them did not live to see.
Note political free signature.
I figure if you wanted my opinion on items unrelated to this forum, you'd ask for it.


Last edited by JohnB on Sun Aug 15, 2021 2:15 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 9:13 am 
Offline
1000+ Posts!
1000+ Posts!

Joined: Sun May 30, 2004 9:56 am
Posts: 1543
Location: Brush Prairie, WA, USA
those utubes were float planes, not sea planes.

_________________
GOOD MORNING, WELCOME TO THE UNITED STATES OF AMERICA
Press "1" for English.
Press "2" to disconnect until you have learned to speak English.


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 9:49 am 
Offline
3000+ Post Club
3000+ Post Club

Joined: Fri Sep 17, 2004 9:33 pm
Posts: 4707
Location: refugee in Pasa-GD-dena, Texas
I'm wondering what a football field or 2 of foam over sand would cost? With about another 100 or 200 yrds of sand to runoff into after that...things that make you go hmmmmmnnn... pop2

_________________
He bowls overhand...He is the most interesting man in the world.
"In Peace Japan Breeds War", Eckstein, Harper and Bros., 3rd ed. 1943(1927, 1928,1942)
"Leave it to ol' Slim. I got ideas...and they're all vile, baby." South Dakota Slim
"Ahh..."The Deuce", 28,000 pounds of motherly love." quote from some Mojave Grunt
DBF


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 10:39 am 
Offline

Joined: Tue Oct 27, 2020 3:01 pm
Posts: 142
Location: N Yorkshire
Gerry Anderson had the right idea way back in the 1960's.. :D

https://youtu.be/2lWNZowvWEk?t=108


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 12:27 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Fri Apr 30, 2004 7:13 pm
Posts: 5663
Location: Minnesota, USA
Stoney wrote:
those utubes were float planes, not sea planes.



Mea culpa.

Thank you for the gentle reprimand, Mr. Stonich.

I knew what I wanted to write, I just didn't write it right.

float plane
float plane
float plane
float plane
float plane...

_________________
It was a good idea, it just didn't work.


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 1:17 pm 
Offline
3000+ Post Club
3000+ Post Club

Joined: Fri Sep 17, 2004 9:33 pm
Posts: 4707
Location: refugee in Pasa-GD-dena, Texas
Paul Stroud wrote:
Gerry Anderson had the right idea way back in the 1960's.. :D

https://youtu.be/2lWNZowvWEk?t=108

Linky no worky... pop2

_________________
He bowls overhand...He is the most interesting man in the world.
"In Peace Japan Breeds War", Eckstein, Harper and Bros., 3rd ed. 1943(1927, 1928,1942)
"Leave it to ol' Slim. I got ideas...and they're all vile, baby." South Dakota Slim
"Ahh..."The Deuce", 28,000 pounds of motherly love." quote from some Mojave Grunt
DBF


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 1:34 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Sun Nov 07, 2004 2:02 am
Posts: 4695
Location: Yucca Valley, CA
airnutz wrote:
Linky no worky... pop2

Me fixy:
https://www.youtube.com/watch?v=yR4nKdMYKGc

_________________
Image
All right, Mister Dorfmann, start pullin'!
Pilot: "Flap switch works hard in down position."
Mechanic: "Flap switch checked OK. Pilot needs more P.T." - Flight report, TB-17G 42-102875 (Hobbs AAF)


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 2:13 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Wed Jan 19, 2011 12:27 am
Posts: 5595
Location: Eastern Washington
airnutz wrote:
I'm wondering what a football field or 2 of foam over sand would cost? With about another 100 or 200 yrds of sand to runoff into after that...things that make you go hmmmmmnnn... pop2



I wonder if D-M go along with...?
Pima seems to have good relationship a with D-M, considering the number of civil aircraft that landed there before being towed across the highway.
An option would be to land in the grass (or as close to grass as you get in a non-irrigated area there) strip between runway 12/30 and the parking ramp.

Yes, the pilots might dismiss it out of hand, but if possible, it would save Pima a lot of money, possibly making the acquisition of a MARS possible instead of "not worth the cost".

Worth asking the question.

_________________
Remember the vets, the wonderful planes they flew and their sacrifices for a future many of them did not live to see.
Note political free signature.
I figure if you wanted my opinion on items unrelated to this forum, you'd ask for it.


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Sun Aug 15, 2021 6:58 pm 
Offline
3000+ Post Club
3000+ Post Club

Joined: Fri Sep 17, 2004 9:33 pm
Posts: 4707
Location: refugee in Pasa-GD-dena, Texas
It's been a few years since I've visited Pima and D-M, but I don't recall grass as really being a "thing" there.
Scrub and sand...tho that brings to mind an alternate bedding material for the Mars. Gather up a 20 foot deep pile of tumbleweeds and netting about 200 yards long and foam that down. Lotsa ideas here..holler if ya'll need more!!! :D

PS
There are a coupla' reservoirs and lakes relatively close by, but the drought out west may have reduced those to shallow ponds.(worth a google check) Tho, the silver lining there is the Lake Meade B-29 is only 140 feet deep now.

_________________
He bowls overhand...He is the most interesting man in the world.
"In Peace Japan Breeds War", Eckstein, Harper and Bros., 3rd ed. 1943(1927, 1928,1942)
"Leave it to ol' Slim. I got ideas...and they're all vile, baby." South Dakota Slim
"Ahh..."The Deuce", 28,000 pounds of motherly love." quote from some Mojave Grunt
DBF


Top
 Profile  
 
 Post subject: Re: MARS
PostPosted: Mon Aug 16, 2021 8:06 am 
Offline
2000+ Post Club
2000+ Post Club

Joined: Mon Jul 26, 2004 2:38 pm
Posts: 2662
Location: Nashville, Tennessee
Okay, I'll chime in. The optimum way to get it to Pima may be to fly it to the nearest port where it can be landed safely, dry docked and disassembled. The huge pieces would have to be sent to Pima by rail and reassembled. This would cost a few hundred thousand dollars or more.
The cheapest would be to land it on the runway and then have it hoisted by crane onto a trailer and moved onto the lot. Let's look at that option.

1) Grass landing. My dad's mentor, Paul Booth, a WW II veteran, once told me that grass was less ideal than pavement as there are rocks, lumps and divots that do great damage to the surface of a light airplane. He said it's far preferable to put it on a hard surface.

2) Foam or other soft prep, like sand. My understanding is that foam is put down to reduce the friction, sparks, static electricity, etc. and reduce the chance of fire. The purpose isn't to save the aircraft. Foam is very expensive. Often, when foam is applied, the aircraft slides th4rough it and onto the dry runway for a distance, anyway.

3) I have had two belly landings in flying boats. The first was a 1300 lb. Thurston Teal TSC-1/M. The gear collapsed and it slid down the runway a hundred feet or so. It was extremely unstable as it's weight was balanced on one or two rivets on the chine. If I hadn't been a taildragger and glider pilot, it probably would have been a major groundloop. I Kept the wings level as long as possible and when the right sponson came down, it only needed some touch up paint. Sliding abut 120', the large rivets on the keel were ground down flush with the aluminum. They were promptly replaced and the keel was repainted.
More recently, while flying the Lake LA-4 Buccaneer, the left landing gear retracted. what started as a normal landing evolved into the left gear collapsing and us sliding along on the belly and the left sponson. I had directional control as it was trying to groundloop to the left. I maintained directional control ( with right brake)and trended to the left side of runway until speed decreased to about 10 mph. Intending to exit the runway between runway lights so as to come to a stop without having to close the runway. As it slowed down to say, 5 mph, the keel dug into the dirt , and put the airplane into a nasty 1/4 groundloop. We were able to jack the airplane, get the airplane gear down and locked, and fly it the next day. What appeared to be slight damage at 4 mph, was quite expensive to repair and make the plane seaworthy again.
4) A problem with the Mars is it's extreme weight. It also has the softer aluminum, not the tougher stuff used on airliners today. When landing on water, even if it's dropped in from a few feet, the water will compress and displace as the hull is settling into and moving forward on the water. The keel is never supporting 100% of it's weight as you would be asking it to do with a landing on concrete. Even if the hull held together, I estimate it would slide 1,000' to 2,000'. Would it even slide or would it start to deconstruct the fuselage? Worst case it it could end up on the side of the runway, on its back, and on fire. Have there been any successful gear up landings of early aircraft of similar weight? Pics of B-29's, B-50's, KC-97's, or DC-7's might give us a clue.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 62 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], K5DH and 317 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group