Wiring Loom in T-6 Rear Fuselage

[Yak3]

Hi, I'm currently away so away from any of the technical details relating, however my engineer is keen to put together and install the wiring loom (as such as there is) in the rear fuselage of the T-6. We don't have the recognition lights installed, so all we have is the rudder mounted tail light. Does anyone have available a schematic illustrating the routing of the wiring and which Cannon plug is used?

Again, any details very welcome.

Thanks

[Mustanger55]

If you have engineering drawings, look at 88-54009, 88-54508 and 84-23001.

I'm still new at the T-6 stuff, but these look as if they have the basic info you need. Parts catalog might fill in bits and pieces for the connectors and junctions.

[Yak3]

Thanks for the details. Problem is all my tech stuff is locked in my office and I'm not back there for at least three weeks so I'm without access to any of the details needed.

[Mustanger55]

PM incoming.