Oh yeah, Lawn Furniture

[sdennison]

[Noha307]

I don't get it; is that a cowling?

Or are the kitchen spammers at it again?

[sdennison]

I don't get it; is that a cowling?

Or are the kitchen spammers at it again?

Must be new here? People accused me of not being qualified fabricator but a maker of lawn furniture...

Yup, 747 engine nacelle turned bar.

[The Inspector]

GOGLE IMAGE MOTOART. they had a short lived reality show a few years back and do some very cool things with old airplane bits and pieces.

[sdennison]

GOGLE IMAGE MOTOART. they had a short lived reality show a few years back and do some very cool things with old airplane bits and pieces.

My blue print...Ha ha! Don't tell them.

[4RG.I.'S]

Cool work, Waukesha neighbor...
Is this something a Fellow WIX-er could see in person?

[sdennison]

Cool work, Waukesha neighbor...
Is this something a Fellow WIX-er could see in person?

Pm me

[sdennison]

Some additions:


Titanium Huey UH-1 turbine blade key fobs. Have F-86 as well.



Titanium 747 First Stage Compressor Blade. Have 727 first and second stage as well as a Harrier first stage blade.




Martin Baker bar stools from Fiat G-91 fighter.

[Noha307]

Some additions:


Martin Baker bar stools from Fiat G-91 fighter.

You now have my full attention!

Also, is your bar in a hangar?
(Okay, I realize those are two different locations, but I couldn't help myself.)

I can't stop picturing a drunk guy falling off of those seats yelling: "EJECT! EJECT!"

[TimAPNY]

I like it! That would be a great bar. Really love the seats!

Tim

[sdennison]

Ha! Yeah all good comments. Funny but these are actually very comfortable seats. I reduced them to the basics as the original configuration would not have been. I have used NOS "upholstery" with a slight mod cushion under the seat but all the women say, "These are really comfortable seats."

Before

After

In service


Let me know if you are interested as there are many configs out there.

[Rossco]

Or make one up yourself..

http://www.simpits.org/design/HowTo_Ace ... _Ace2.html

http://www.viperpits.org/smf/index.php? ... board=23.0

[sdennison]

Or make one up yourself..

http://www.simpits.org/design/HowTo_Ace ... _Ace2.html

http://www.viperpits.org/smf/index.php? ... board=23.0

Yup, nothin to it.

[sdennison]

Bar counter finished. Birch ply with ebony stain and 6 hand rubbed coats of spar.



Now working the back bar and wine rack.



CAF fund raiser donation. Polished titanium turbine blade and custom frame with 1969 magazine ad.

[Dan Jones]

How in the hell did you get it in the house?!? I'm impressed.