Warbird Information Exchange

Does anybody know the status of this project? http://findarticles.com/p/articles/mi_qa3901/is_200607/ai_n17176614/ Reportedly owned by Dick Neumann and being worked on by Austin Sky Services.

All it takes is money and man hours.

C2j

Have not heard of this. I'm in the Fort Worth area and quite interested as well. Google turns up zippo...

FAA site comes up with:

N12363 is Assigned
--------------------------------------------------------------------------------
Aircraft Description
Serial Number 23 Type Registration Individual
Manufacturer Name CURTISS-WRIGHT Certificate Issue Date 04/18/1972
Model T-32-C CONDOR II Status Undel Tri
Type Aircraft Fixed Wing Multi-Engine Type Engine Reciprocating
Pending Number Change None Dealer No
Date Change Authorized None Mode S Code 50061035
MFR Year None Fractional Owner NO

--------------------------------------------------------------------------------
Registered Owner

Name NEUMANN RICHARD D
Street 18616 SATICOY ST
City RESEDA State CALIFORNIA
County LOS ANGELES Zip Code 91335
Country UNITED STATES

According to Switchboard.com the only Richard D. Neumann in Reseda area is:

Richard D Neumann
29489 Poppy Meadow St
Canyon Country, CA 91387-4421
(661) 251-9475

Give him a call and see if he is the guy. It would be neat to know where the wreckage is located.

Cheers,

_________________
Bill Goebel
aka TPFD

Vintage Aircraft Services
Aircraft restoration and rebuilding
Rhome, TX

http://www.vintageaircraftservices.net

There's a Condor wheel at Stinson at the Texas Air Museum.

Ryan

_________________
Aerial Photographer with Red Wing Aerial Photography currently based at KRBD and tailwheel CFI.
Websites: Texas Tailwheel Flight Training, DoolittleRaid.com and Lbirds.com.

The horse is prepared against the day of battle: but safety is of the LORD. - Prov. 21:31 - Train, Practice, Trust.

PfD,

Thank you for the "leg work". I did call the number and it has been disconnected. Through directory assistance I got a number for another Neumann in the area. Tried it and they said "wrong number".

Anybody have any connection to the Austins? Former American Airlines Fred L. Austin III, Current AA Chris Austin or Brian Austin?

C2j

I spoke with the folks who were working on this project a few years ago. I was researching a Condor that was abandonded on the ice after an early South Pole expedition and managed to stumble onto the group you are talking about. They recovered the remains of a Condor off the side of a mountain in the New England I think. If I can find the contact info in my notes, I'll send you a PM. I'd enjoy hearing an update also. The Condor is another one of those "Ghost airplanes" that was built here in town. It sure would be nice to see one flying!

_________________
Albert Stix Jr.
"Work is the curse of the drinking class"

c2j,

PM sent with some more phone numbers and such. Let us know what you come up with!

_________________
Bill Goebel
aka TPFD

Vintage Aircraft Services
Aircraft restoration and rebuilding
Rhome, TX

http://www.vintageaircraftservices.net

PFD,

Thanks! I'll follow up and post what I find.

By sheer coincidence, I found this on Barnstormers today:
http://www.barnstormers.com/bizcard.php?username=fredaustin

C2j

Looks like you found the patriarch of the clan. Report back your soonest!

_________________
Bill Goebel
aka TPFD

Vintage Aircraft Services
Aircraft restoration and rebuilding
Rhome, TX

http://www.vintageaircraftservices.net

I had a really nice phone conversation with Mr. Fred Austin. Very personable and knowledgable fellow. Here is the jist of what I got.

The Austins and Mr. Neumann (owner of the Condor project) have parted ways over differing ideas for the project. Part of the issue (apparently now solved) was a lack of drawings. I heard no animosity, just that they had different ideas.

Mr. Neumann and the Condor parts are in Moab, Utah. When Mr. Neumann salvaged the wreckage, it was cut into pieces that were manageable by people carrying them through the woods for some distance. The cutting wasn't hap hazard, but the remains are a lot of smaller parts.

Never say never, but the majority of the parts in posession of Mr. Neumann may only be good for patterns (my opinion - see pics.). Some knowledgable outside advice apparently pushed the approximate cost of restoration to $5 Million (mainly due to man hours). Like they say - It's doable, it just takes time and money! Mr. Neumann would be interested in talking with anyone interested in financing the restoration.

It would be really neat to have this "missing link" restored, but I don't know anybody with the money to invest in this...

These pictures are coutesy of Mr. Austin. I don't have his explicit permission to post them and hope that it is OK. There is a possibility that the B&W pictures were published a few years ago in Skyways Journal of Aviation #83 or #84. I post them here for educational value only.

C2j

Crash site of N12363


Wreckage of N12363 circa 1940.


N12363 circa 2006.


Portion of main cabin structure.


Current condition of steele structure.

Nice work! Very interesting stuff. Right around the time we finished our Boeing (almost 2 years ago now) we were contacted regarding this airplane. I can't really say I recall what the purpose of the contact was, maybe just to show us a really cool project but anyway...I've been wondering about it ever since. Sure would be cool!

It seems to me like someone who was willing to do the work on their own (like we did our Boeing) could cut that cost considerable, probably 10x - but that's just my thoughts. To pay someone to build it, now that's another story. Did I mention, THAT THING WOULD BE SO COOL!!!

_________________
Ryan Pemberton
www.pembertonandsons.com

Ryan,

Is Aaron Hoffman still out there with you guys?

C2j

Those are the first color photos I've ever seen of the project. This looks like a great project for Glen Peck!

http://www.peckaeroplanerestoration.com/

Intersting that I just noticed this piece on ebay Saturday evening.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWAX:IT

It's listed as C-46 prints and there are a few there but there is also a CW drawing from 1937 for the Condor! They built a few C-46s in St. Louis but I think they built all of the Condors here. Sure would be cool to see a flying Condor!

_________________
Albert Stix Jr.
"Work is the curse of the drinking class"

Yeah, in fact right now he's my CFII. I see him probably 4 times a week.

_________________
Ryan Pemberton
www.pembertonandsons.com

Tell Aaron "The Boys From York" say "Hi!"

C2j

Albert, what ever happened to the abandoned Condor? Was it ever recovered? I remember it was part of an inovative expedition that had a lot of advanced transportation for the time....

_________________
Civis Aerius Sum

I am a citizen of the Air