Tue Sep 22, 2009 10:24 am
interesting to see that you guys restored Dr Joe's P-51 here in Lexington KY. I always wondered where it came from.
Wed Sep 23, 2009 8:17 pm
bax101 wrote:interesting to see that you guys restored Dr Joe's P-51 here in Lexington KY. I always wondered where it came from.
Actually it was already restored when Dr. Joe bought it. I was helping with the Annual Inspection on Honey for Dr. Joe. I think she was restored by Brad Hood. I been helping restore Dr. Joe's Ryan PT-22. Great collection of Warbirds they have.
Last edited by warbird_patrick on Wed Sep 23, 2009 8:28 pm, edited 2 times in total.
Wed Sep 23, 2009 8:18 pm
If anyone has any parts for the NA-64 laying around please contact me.
Fri Sep 25, 2009 10:32 am
Here are some up dated pictures of the seat progress. All of the aluminum parts are finished and ready from primer, still have to make a couple of the small steel parts.
Sat Sep 26, 2009 12:00 pm
Legendofaces wrote:If anyone has any parts for the NA-64 laying around please contact me.
Do you have the NAA Document that is a cross reference between the NA-64, NA-66, and the T-6? It lists which parts are in common etc.
If you don't have it I will try to can it into a PDF for you. Probably won't happen until after our auction, though...
Sat Oct 24, 2009 2:06 pm
Update: October 24, 09
Acquired all the left over parts from the restoration of Yale 3400, Got the lower wing attach angle cover bands i was missing, plus the much need prop hub. I have a bunch of parts that i will not be using but selling to help fund the restoration.
Received parts of shoulder seat harness release, donated by Eric Miller, Project Warbird Museum.
Placed an order for more 4130 steel for the seat parts that need to be made. Currently in the process of repairing the damage to the pilot seat. There are two cracks near the upper seat support, I designed two repair patches in CAD that will be riveted on both sides of the seat over the crack. I have also made the new support seat pan that was severely corroded and am in the process of fitting it into place.
Crack in upper Seat back support
CAD drawing of repair patch
Corroded seat pan
New seat pan
Test fitting of all parts
Acquired all the left over parts from the restoration of Yale 3400, Got the lower wing attach angle cover bands i was missing, plus the much need prop hub. I have a bunch of parts that i will not be using but selling to help fund the restoration.
Received parts of shoulder seat harness release, donated by Eric Miller, Project Warbird Museum.
Placed an order for more 4130 steel for the seat parts that need to be made. Currently in the process of repairing the damage to the pilot seat. There are two cracks near the upper seat support, I designed two repair patches in CAD that will be riveted on both sides of the seat over the crack. I have also made the new support seat pan that was severely corroded and am in the process of fitting it into place.
Crack in upper Seat back support
CAD drawing of repair patch
Corroded seat pan
New seat pan
Test fitting of all parts
Sat Oct 24, 2009 4:23 pm
Nice update. That patch repair is excellent!!
Sat Oct 24, 2009 4:33 pm
peter wrote:Nice update. That patch repair is excellent!!
Thanks Peter,
There is actually another rectangular piece that will on on the inside of the seat to give it a little more stiffing, Ill post some pictures of it once i get it all made up.
Mon Oct 26, 2009 4:52 pm
Do have who the company that manufacture the seats was for this aircraft? (Slick Johnson?)
Does the seat use a bungee cord as part of the suspension?
I been try to tract down the history on these “squareback” seats
I think they get there starts in the need to accommodate the French backpack parachutes
The typical prewar US aircraft seat was a round back bucket for a seat pack parachutes only
When all the French order to US that was a need for a modified seat to fit the French backpack parachutes
I been also trying to show the same seat being used in the Tomahawk
Does the seat use a bungee cord as part of the suspension?
I been try to tract down the history on these “squareback” seats
I think they get there starts in the need to accommodate the French backpack parachutes
The typical prewar US aircraft seat was a round back bucket for a seat pack parachutes only
When all the French order to US that was a need for a modified seat to fit the French backpack parachutes
I been also trying to show the same seat being used in the Tomahawk
Mon Oct 26, 2009 9:32 pm
HBBates wrote:Do have who the company that manufacture the seats was for this aircraft? (Slick Johnson?)
Does the seat use a bungee cord as part of the suspension?
I been try to tract down the history on these “squareback” seats
I think they get there starts in the need to accommodate the French backpack parachutes
The typical prewar US aircraft seat was a round back bucket for a seat pack parachutes only
When all the French order to US that was a need for a modified seat to fit the French backpack parachutes
I been also trying to show the same seat being used in the Tomahawk
Hello, I have been told the seat that are used in the NA-64 were manufactured by American Seating company out of Grand Rapids MI. The Slick Johnson seats are used in the AT-6 Texan and are different then the type I have. These seats do use a bungee cord as part of the suspension to assist in the seat adjustment like the T-6.
The Assembly # on the seat is 49-53074... the 49- Prefix stands for Harvard 1 Modified BC-1 England 2 place trainer.
Mon Oct 26, 2009 10:04 pm
From what I understand, the seats are not comfortable with US parachutes.
Mon Oct 26, 2009 10:10 pm
Here is another thread about the seats used in the North American Trainers:
http://www.warbirdinformationexchange.o ... 53b52ad74b
http://www.warbirdinformationexchange.o ... 53b52ad74b
Wed Oct 28, 2009 3:38 pm
Update: October 28, 09
Parts and tools arrived today from Aircraft Spruce,it feels like x-mas. I plan on making some parts for the seats this coming weekend.
Parts and tools arrived today from Aircraft Spruce,it feels like x-mas. I plan on making some parts for the seats this coming weekend.
Sat Oct 31, 2009 6:06 pm
Update: Oct 31, 09
Spent today rearranging the shop and tools, I bought my self a label maker so had some fun with that labeling the tools chest. I did manage to get a couple of parts made for the seats and plan on doing more tomorrow.
Spent today rearranging the shop and tools, I bought my self a label maker so had some fun with that labeling the tools chest. I did manage to get a couple of parts made for the seats and plan on doing more tomorrow.
Sat Nov 07, 2009 11:12 am
Here is a picture of my Yale 3383 when she had her forced landing on August 6, 1942 at Calton.
