Fri Aug 21, 2009 3:31 pm
Fri Aug 21, 2009 3:44 pm
corsairboss wrote:I was talking about the FG-1D is gone and now located out west and yes the F2G #74 has also been sold and expected to fly by the end of summer.
There are a few new corsairs getting ready to come out of shops in the next couple of months.
Fri Aug 21, 2009 4:12 pm
MattP38 wrote:
There was an article in one of the aviation magazines about 10 years ago, discussing an engine mechanic modifying two Allisons for a Twin Mustang. I’m not sure if they were stock or had been modified by a tractor puller and the mechanic was converting them back, but I didn’t hear much more after that. Pretty vauge, but as I said it was a while ago now. I'm not sure which airframe it was.
Fri Aug 21, 2009 4:55 pm
Fri Aug 21, 2009 6:28 pm
Dan K wrote:MattP38 wrote:
There was an article in one of the aviation magazines about 10 years ago, discussing an engine mechanic modifying two Allisons for a Twin Mustang. I’m not sure if they were stock or had been modified by a tractor puller and the mechanic was converting them back, but I didn’t hear much more after that. Pretty vauge, but as I said it was a while ago now. I'm not sure which airframe it was.
Must've been for 46-255 with C&P. The only other potential fliers (Reilly XP-82 and the former-CAF machine) both mount Merlins.
Fri Aug 21, 2009 7:00 pm
chris hill wrote:If i recall right the p-82 had allisons.
Fri Aug 21, 2009 8:41 pm
Mike wrote:chris hill wrote:If i recall right the p-82 had allisons.
Not all of them. Some variants had Merlins (the early pre-production aircraft), later ones Allisons.
Fri Aug 21, 2009 9:00 pm
MattP38 wrote:Dan K wrote:MattP38 wrote:
There was an article in one of the aviation magazines about 10 years ago, discussing an engine mechanic modifying two Allisons for a Twin Mustang. I’m not sure if they were stock or had been modified by a tractor puller and the mechanic was converting them back, but I didn’t hear much more after that. Pretty vauge, but as I said it was a while ago now. I'm not sure which airframe it was.
Must've been for 46-255 with C&P. The only other potential fliers (Reilly XP-82 and the former-CAF machine) both mount Merlins.
Thanks Dan. I thought there was a pic of the plane in a restoration shop, but again I might be wrong about that. What is the status of 46-255?
Fri Aug 21, 2009 9:09 pm
Dan K wrote:MattP38 wrote:Dan K wrote:MattP38 wrote:
There was an article in one of the aviation magazines about 10 years ago, discussing an engine mechanic modifying two Allisons for a Twin Mustang. I’m not sure if they were stock or had been modified by a tractor puller and the mechanic was converting them back, but I didn’t hear much more after that. Pretty vauge, but as I said it was a while ago now. I'm not sure which airframe it was.
Must've been for 46-255 with C&P. The only other potential fliers (Reilly XP-82 and the former-CAF machine) both mount Merlins.
Thanks Dan. I thought there was a pic of the plane in a restoration shop, but again I might be wrong about that. What is the status of 46-255?
Go back to page 1 of this thread and scroll down to John Kerr's pics. 46-255 and NACA-133 are one and the same girl. The Harker brothers at C&P are slowly but lovingly bringing her back to life.
So, does anyone else remember the Warbirds International cover that said she'd be flying in 2000? I've been slowly but lovingly banging my head in the corner ever since.![]()
(I believe that was also the last time I ever purchased something from Challenge.)
Mon Aug 24, 2009 10:14 pm
Mon Aug 24, 2009 10:23 pm
Aircraft Mech Paul wrote:Hi Guys,
Umm... Not to rain on anyone's parade here. But a few years back I was corresponding with a gentleman by the name of Dick Odgers (?) who has recovered a majority of a P-82 from a scrap yard, which in and of itself isn't all that remarkable, but the fact that he found it in what turned out to be a "Super-Fund" cleanup site is. He is up in Alaska, and I have since lost his correspondence. But he did tell me that he found this P-82 while looking for parts for his P-40 project. He came upon a P-51 fuselage that didn't look quite right, having only one side of the horizontal stab attach point. But what he did tell me is that it was his intent to make it flyable. So, there is potential for yet another P-82 out there.
FYI....make your own conclusions here.
Paul
Mon Aug 24, 2009 10:33 pm
Jerry O'Neill wrote:Aircraft Mech Paul wrote:Hi Guys,
Umm... Not to rain on anyone's parade here. But a few years back I was corresponding with a gentleman by the name of Dick Odgers (?) who has recovered a majority of a P-82 from a scrap yard, which in and of itself isn't all that remarkable, but the fact that he found it in what turned out to be a "Super-Fund" cleanup site is. He is up in Alaska, and I have since lost his correspondence. But he did tell me that he found this P-82 while looking for parts for his P-40 project. He came upon a P-51 fuselage that didn't look quite right, having only one side of the horizontal stab attach point. But what he did tell me is that it was his intent to make it flyable. So, there is potential for yet another P-82 out there.
FYI....make your own conclusions here.
Paul
I think I heard that Tom Reilly may have acquired those Alaskan F-82 parts.
Jerry
Mon Aug 24, 2009 10:39 pm
Aircraft Mech Paul wrote:Hi Guys,
Umm... Not to rain on anyone's parade here. But a few years back I was corresponding with a gentleman by the name of Dick Odgers (?) who has recovered a majority of a P-82 from a scrap yard, which in and of itself isn't all that remarkable, but the fact that he found it in what turned out to be a "Super-Fund" cleanup site is. He is up in Alaska, and I have since lost his correspondence. But he did tell me that he found this P-82 while looking for parts for his P-40 project. He came upon a P-51 fuselage that didn't look quite right, having only one side of the horizontal stab attach point. But what he did tell me is that it was his intent to make it flyable. So, there is potential for yet another P-82 out there.
FYI....make your own conclusions here.
Paul
Tue Aug 25, 2009 1:56 am
Tue Aug 25, 2009 7:09 am