I debated with myself as to whether to publish this run.
But I want my people to watch the video, read your comments and learn.
IF WE AND ANY OTHER OPERATORS LEARN ANYTHING FROM THIS THAT PREVENTS AN ACCIDENT I WILL PUT IT OUT THERE AND TAKE MY LUMPS!!!
Many things went on during that last test run that need reviewing and improving before the next run.
The first run of the day we had radios. And we actually had the hand signals worked out.
And we actually had a Ground MArshall who was assigned that duty and they were not supposed to wander off.
The second run the engine was started while I was still in the plane.
And then whoever was supposed to be marshalling wandered off.
The third run I kept a perfectly good P61 veteran from getting whacked by a prop prior to engine start. No harm, no foul!
Then when I did give the signal to CUT IT OFF someone in the cockpit decided to have a debate over how long the MO wanted the third run to last.
The hand across the neck was supposed to signify STOP RIGHT NOW!
This will be gone over again before the next run.
The Ground Marshall visually monitoring the systems should have the veto power on calling stop.
The pilot has the option to stop BEFORE then, if instruments are indicating problems and the guy on the ground can have it "splained" later why.
BUT IF THE GROUND MARSHALL IS FRANTICALLY SAWING ACROSS HIS THROAT IT AIN'T OPEN TO DEBATE!
Gary read it right... the external oil filter had an O-ring let go.
The cockpit crew could not see that from inside the plane.
If it had been on the oil feed side we might have fried an engine.
AGAIN... the pilot saw the signal but decided to engage in a debate until the MO came up the hatch and told him to shut her down.
I am surprised no one has commented on the near prop miss prior to start up.
That is why the PROP CLEAR confirmation is necessary for large aircraft.
We did that, but it could have been easy to miss with all the Looky Lous milling around.
Why the test club??? is... that it looks so cute...

But really it saves time on the Hamilton Standards... And it doesn't generate the thrust that the big prop would.
Yes we know we will have to put the real props on to cycle the governors, but these test runs are to determine if we have any bearings or other parts "making metal" and if we DID and we had the real Hamilton Standards on, then we would have to send them off to be cleaned and re yellow-tagged.
I know a bunch of experts may disagree with this, but hey... sometimes one has to do what one thinks is the most prudent.
SPANNER