Tech Question for The P-51 Gurus

[Mark V]

Nor are the gun camera prop spinner markings shown on this print.
Rich

Thats right Rich - all the stuff regarding gun and camera harmonzation and markings (spinner, nose and prop blades) is in the manual.

[Glenn Wegman]

You must be looking a a different print as the NAA print I have shows the spinner markings for the gun camera and gun sight alignment.

[51fixer]

You must be looking a a different print as the NAA print I have shows the spinner markings for the gun camera and gun sight alignment.

This print was used to pick out detail markings. It doesn't have the P/N info on so it might be incomplete but it shows a side view of a early D without the dorsal fin.
The only prop markings is the degree markings shown in this print.
Rich

[vanguard]

Glenn, as an engine builder what current coolant or additives do you recommend.

[Glenn Wegman]

I've always had good luck with Propylene Glycol from Sta-Clean mixed 50/50.

[Glenn Wegman]

Hello Rich,

I'm not sure which one I have without looking! It is similar to yours though. I have one for a B, and one for a D, but I'm not sure if it's an early or late D. I'll look tomorrow.

Thanks,

[David W3]

Hi Glenn,
Would you mind giving the NAA drawing number for the drawing in your lobby please?
Many thanks,
David

[Jack Cook]

Glenn,
Also please list all the part numbers for Eric Downing.
He really likes that kind stuff

[51fixer]

Glenn,
Also please list all the part numbers for Eric Downing.
He really likes that kind stuff

Do I need to give the Serial Numbers as well?
Rich

[Hal B]

Glenn,
Also please list all the part numbers for Eric Downing.
He really likes that kind stuff

Do I need to give the Serial Numbers as well?
Rich

Only if you want to make him REALLY happy!