Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Tube for Early 12.5" Tailwheel? (not Mustang style)
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=52187		 Page 1 of 1
Author:  rcaf_100 [ Sun Feb 09, 2014 7:02 pm ]
Post subject:  Tube for Early 12.5" Tailwheel? (not Mustang style)
Hi guys,

Just taking a shot in the dark here, but would anyone know a source for tailwheel tubes for the earlier-style 12.5" tailwheels?

Dessler has tubes available, but the filler stem is bent at a 90 degree angle for the 5-bolt Mustang style rim.

We are looking for the earlier style with the straight filler stem, as seen below.

Image

If none are available, we'll have to try and find a newer-style rim...

Thanks in advance!

:partyman:
Author:  Mustanger55 [ Mon Feb 17, 2014 6:41 pm ]
Post subject:  Re: Tube for Early 12.5" Tailwheel? (not Mustang style)
As part of the static restoration I'm doing, I searched the net and found the smooth 10.00 SC tire online at Desser Tire. I would guess they would have the correct inner tube for the early style T-6 tail wheel. ( http://www.desser.com/ )

Let me know where you find yours. I'll need one eventually but will probably settle for an implement tire tube.

Good Luck!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/