| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Tail wheel https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=51759 |
Page 1 of 1 |
| Author: | jdankos [ Mon Dec 30, 2013 9:56 am ] |
| Post subject: | Tail wheel |
I would like to recieve a copy of the following drawings. I have the SNJ drawings but these are for a G tailwheel. 168-34035, 168-34036 Thanks Jackie |
|
| Author: | 51fixer [ Mon Dec 30, 2013 2:41 pm ] |
| Post subject: | Re: Tail wheel |
Not applicable to all tailwheels used. T/Ws were Gov Furnished and IPC lists a Hayes and a Goodyear T/W hub. The Hayes didn't have the ability to install the covers. I have a corroded Firestone hub that had their covers installed. Wasn't one of my best epay purchases as the wheel was heavily corroded and the covers and the tailwheel covered the damage. But hey, it had new bearings and a fresh paint job. The Firestone Assy # J0200M-1 on the 2 wheels like this I have. Shoot a pm and I'll try to see if I have the prints. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|