If Lance doesn't have them, you might try Pioneer Aero Services ( http://www.pioneeraerosvc.com/index.html ). They concentrate on Mustang stuff and can be a bit pricey, but it might be worth a look-see.
| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| T-6 Oil Tank Turnbuckle Nuts https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=50909 |
Page 1 of 1 |
| Author: | chippie51 [ Fri Sep 27, 2013 5:37 pm ] |
| Post subject: | T-6 Oil Tank Turnbuckle Nuts |
Hi, does anyone out there have available the drawing available for the oil tank mount turnbuckle nuts, part numbers IN3-2 and IN3-3? I believe these were used on both the T-6 and P-51. Thanks |
|
| Author: | Mustanger55 [ Fri Sep 27, 2013 9:31 pm ] |
| Post subject: | Re: T-6 Oil Tank Turnbuckle Nuts |
Got this from the P-51 NAA Drawing Set. http://p51h.home.comcast.net/~p51h/at6b/wix/1N3.tif Hope this helps. |
|
| Author: | bdk [ Fri Sep 27, 2013 9:50 pm ] |
| Post subject: | Re: T-6 Oil Tank Turnbuckle Nuts |
Lance has them for less than you could make them for if you included your time. |
|
| Author: | chippie51 [ Sat Sep 28, 2013 3:36 am ] |
| Post subject: | Re: T-6 Oil Tank Turnbuckle Nuts |
Thanks gents. I tried Lance a few weeks ago and they came back with a "no". Will try again. |
|
| Author: | Mustanger55 [ Mon Sep 30, 2013 7:57 pm ] |
| Post subject: | Re: T-6 Oil Tank Turnbuckle Nuts |
If Lance doesn't have them, you might try Pioneer Aero Services ( http://www.pioneeraerosvc.com/index.html ). They concentrate on Mustang stuff and can be a bit pricey, but it might be worth a look-see.
|
|
| Author: | bdk [ Tue Oct 01, 2013 9:54 am ] |
| Post subject: | Re: T-6 Oil Tank Turnbuckle Nuts |
I'm pretty sure I bought a few from them a year or two ago... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|