T-6 Oil Tank Turnbuckle Nuts

[chippie51]

Hi, does anyone out there have available the drawing available for the oil tank mount turnbuckle nuts, part numbers IN3-2 and IN3-3? I believe these were used on both the T-6 and P-51.

Thanks

[Mustanger55]

Got this from the P-51 NAA Drawing Set.

http://p51h.home.comcast.net/~p51h/at6b/wix/1N3.tif

Hope this helps.

[bdk]

Lance has them for less than you could make them for if you included your time.

[chippie51]

Thanks gents. I tried Lance a few weeks ago and they came back with a "no". Will try again.

[Mustanger55]

If Lance doesn't have them, you might try Pioneer Aero Services ( http://www.pioneeraerosvc.com/index.html ). They concentrate on Mustang stuff and can be a bit pricey, but it might be worth a look-see.

[bdk]

I'm pretty sure I bought a few from them a year or two ago...