Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Looking for Harvard/T-6/SNJ Vertical Stabilizer
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=48593		 Page 1 of 1
Author:  rcaf_100 [ Fri Jan 25, 2013 4:04 am ]
Post subject:  Looking for Harvard/T-6/SNJ Vertical Stabilizer
Hi guys,

Just wondering if anyone has a spare vertical stabilizer kicking around that we could acquire for CHAA's Harvard Mk 4 restoration.
I know some were fitted with a nav light on each side (ie on Yales, Noorduyn-built Harvards, etc) but we are looking for the style without them.

The original stabilizer is being kept as-is as an artifact which means we still need another one to go on the restored aircraft.
Image

Airworthy condition is preferable but restorable condition would work too. :)
And no, we haven't called Lance Aircraft yet (if they even have any). We figured we could see what was out there first.

Thanks in advance.

:partyman:
Author:  pitts91hs [ Wed Jan 30, 2013 5:44 am ]
Post subject:  Re: Looking for Harvard/T-6/SNJ Vertical Stabilizer
I have a couple of extra vertical stabs.
Can take some photos and send them to you.
Gary Henry
midcoast@dishmail.net
Author:  rcaf_100 [ Wed Aug 28, 2013 11:13 pm ]
Post subject:  Re: Looking for Harvard/T-6/SNJ Vertical Stabilizer
Still looking for a vertical stabilizer. (and a rudder as well, but there's no big rush on that...)

:partyman:
Author:  rcaf_100 [ Sat Jul 26, 2014 5:14 pm ]
Post subject:  Re: Looking for Harvard/T-6/SNJ Vertical Stabilizer
Still looking for a vertical stabilizer and rudder in good shape....

:partyman:
Author:  51fixer [ Sat Jul 26, 2014 11:15 pm ]
Post subject:  Re: Looking for Harvard/T-6/SNJ Vertical Stabilizer
rcaf_100 wrote:
I know some were fitted with a nav light on each side (ie on Yales, Noorduyn-built Harvards, etc) but we are looking for the style without them.

The original stabilizer is being kept as-is as an artifact which means we still need another one to go on the restored aircraft.
:partyman:

On T-6G models they riveted a patch where the light panel goes.
It also wouldn't be real difficult to drill off the skin and replace it with a new skin without the cutout.

Is it going to fly?
Author:  Harvard 4 [ Sat Nov 15, 2014 8:48 pm ]
Post subject:  Re: Looking for Harvard/T-6/SNJ Vertical Stabilizer
Hi, we need a vertical fin. Anyone have one available?

Thanks
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/