| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| WANTED: T6/Harvard footpeg https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=46115 |
Page 1 of 2 |
| Author: | Hvd2Pilot [ Wed Jun 20, 2012 7:00 pm ] |
| Post subject: | WANTED: T6/Harvard footpeg |
I'm looking for a footpeg for the T6/Harvard. This is the peg used to climb into either the front or rear cockpit. Thanks, Drew |
|
| Author: | Myles [ Thu Jun 21, 2012 8:22 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
There's one for sale on ePay right now. Item number: 360465931486 Listed in Aviation Parts as: North American T-6 "Texan" Cockpit Step -NOS! Jim http://www.ebay.com/itm/North-American- ... ar&vxp=mtr |
|
| Author: | bdk [ Fri Jun 22, 2012 12:00 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
How much import duty would you have to pay in Canada if you got one from the US? |
|
| Author: | Hvd2Pilot [ Fri Jun 22, 2012 12:25 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Dang, I missed it. I'll email him, maybe he still has it. Thanks Jim. Duty can be next to nothing. For something like this, I'd have them mail it & there wouldn't be any additional charges. If they send UPS it will cost a fortune - not for import duties, but for brokerage fees. I just got a helmet back from Flightsuits.com, spent $500 on new earphones/earplugs and UPS charged me an additional $85 - highway robbery. Drew |
|
| Author: | rcaf_100 [ Fri Jun 22, 2012 12:40 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Drew, if you do get that foot peg off eBay remember the RCAF modified theirs with a straight edge cut into the front. Your existing peg probably has the cut. bdk wrote: How much import duty would you have to pay in Canada if you got one from the US? When I brought my Yale home from Ohio, I was told at the border that any aircraft part built in North America doesn't require import duty. I just had to pay the tax. Probably the same applies here. 
|
|
| Author: | Hvd2Pilot [ Fri Jun 22, 2012 1:01 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
I just noticed that cut on a picture. Thanks for the heads-up. Although I think my search just got a lot harder. Cheers! Drew |
|
| Author: | Chunks [ Fri Jun 22, 2012 7:58 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Quote: I just noticed that cut on a picture. Post the pic to be sure, but I believe I several that have been modified. Would be glad to send you one, just have to find it! Chunks |
|
| Author: | bdk [ Fri Jun 22, 2012 10:14 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
I may have one as well. I can look Sunday unless Chunks finds his first. |
|
| Author: | snj-5 [ Fri Jun 22, 2012 10:25 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
I have spares as well (ones with the cut and ones without). Bela P. Havasreti |
|
| Author: | Hvd2Pilot [ Sun Jun 24, 2012 4:36 pm ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Here's a picture of the type I am looking for. Thanks for all the responses guys, I do appreciated it. If you've got one of this style and wish to part with it, please advise on this thread so that others aren't looking for something I've found. Also, please let me know how much money you are looking for & I'll send you my address. Thanks again, Drew 
|
|
| Author: | snj-5 [ Tue Jun 26, 2012 9:09 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
What picture? Bela P. Havasreti |
|
| Author: | bdk [ Tue Jun 26, 2012 3:32 pm ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
I guess the photo is gone now, but it is the standard Harvard 4 foot peg with the flat front side. |
|
| Author: | Hvd2Pilot [ Fri Jun 29, 2012 12:57 am ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Hi guys, I'm not sure what happened to my picture. I'm out of town until Tuesday, so I'll try to get another one up then. Drew |
|
| Author: | bdk [ Fri Jun 29, 2012 2:17 pm ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Your picture is back! |
|
| Author: | Hvd2Pilot [ Fri Jun 29, 2012 9:51 pm ] |
| Post subject: | Re: WANTED: T6/Harvard footpeg |
Great! If any of you guys would have one, I could sure use it. Drew |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|