| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| WTB: Beech C-45 Cowling Hardware https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=65338 |
Page 1 of 1 |
| Author: | Pooner [ Thu May 18, 2017 11:07 pm ] |
| Post subject: | WTB: Beech C-45 Cowling Hardware |
Anybody have a really damaged Beech C-45 / SNB upper engine cowling laying about? If so, we're seeking a set of two hooks and bracket assemblies off of a donor. We need the steel hooks and the cast aluminum brackets as riveted to the forward nose bowl section of the upper cowl. These hooks are used to hold the upper and lower cowlings together and found in the front lower left and right corners. We've got a beautiful cowling to install but no hardware on our unit. No complete cowling needed - just some donor hooks and brackets out of a single damaged unit that is beyond economical repair. A burned, crunched, or scrapped cowling as an "organ donor" is ideal... What've you got? PM with information or send me your e-mail for photos if the part request isn't clear. Thanks in advance! - Robert in PHX |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|