| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Wanted: MC-215 Drive Cable https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=57798 |
Page 1 of 1 |
| Author: | Cvairwerks [ Tue Apr 26, 2016 12:43 pm ] |
| Post subject: | Wanted: MC-215 Drive Cable |
I'm looking for at least 1 ea MC-215 Drive Cable for an ARC-5/SCR-274 radio system. Length is not important. It does need to have one good end, including the spline fitting and the attach nut. As log as I can get accurate measurements off of it, I'll be happy. If you have one or more that you are willing to sell, pm me. An alternate item would be a MC-211 Right Angle Drive Adapter. |
|
| Author: | K5DH [ Wed Apr 27, 2016 7:49 am ] |
| Post subject: | Re: Wanted: MC-215 Drive Cable |
If you don't get a WIXer response, check with Jay Wisler. He usually has them in stock. Not cheap, but available. |
|
| Author: | Cvairwerks [ Wed Apr 27, 2016 8:51 am ] |
| Post subject: | Re: Wanted: MC-215 Drive Cable |
Dean: I've sent him an email to see if he has them, as his list is a little wonky on the cable information. I will hopefully hear back before the end of the week. Last time I sent him an email, it was a few weeks before I got a response. |
|
| Author: | Ew51 [ Wed Apr 27, 2016 10:05 am ] |
| Post subject: | Re: Wanted: MC-215 Drive Cable |
Best to call Jay. |
|
| Author: | Taigh Ramey [ Thu Apr 28, 2016 6:48 pm ] |
| Post subject: | Re: Wanted: MC-215 Drive Cable |
Mike Hans has some excellent information on his web site about the flexible shafts. I bet you might just find your answers here: http://aafradio.org/garajmahal/flex_drive_cables.html |
|
| Author: | Cvairwerks [ Sat Apr 30, 2016 6:29 am ] |
| Post subject: | Re: Wanted: MC-215 Drive Cable |
Thanks Taigh for that link, it will help. The one thing that it doesn't have, though, are dimensions for the spline coupling. With that, I can have coupling either cold headed or sinker EDM'd as necessary. If I don't hear from Jay in the next week or so, I'll give him a call and see what I can find out from him on his cables. IF that isn't any success, I can always get a parts radio and pull the drive from it and measure. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|