| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Looking for some (Boeing) bearings https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=40992 |
Page 1 of 1 |
| Author: | Ztex [ Wed May 18, 2011 11:54 am ] |
| Post subject: | Looking for some (Boeing) bearings |
I am looking for some bearings for a customer...Non-aircraft use only... I bought the only ones of these that I could find last year , now my customer is looking for more... Anyone know a source? Thanks Zane Boeing Part Number - BACB10C123H Shafer Rod End |
|
| Author: | bdk [ Wed May 18, 2011 2:41 pm ] |
| Post subject: | Re: Looking for some (Boeing) bearings |
http://www.aerotechsolutions.com/ may have them. Rexnord Industries part number SM5-8C1-502. Not sure if that is the whole rod end or just the bearing though. http://www.macairparts.com in Vista, CA says they have 2 in stock Please double check with them to make sure I didn't make a boo-boo. Do you need the entire rod end or just the bearing? Quote: PID - Procurement Item Description () BEARING,ROLLER,ROD END BOEING CO (81205) SEATTLE,WA. P/N BACB10C123H ACCEPTABLE SOURCE REXNORD INC./BEARING OPNS.(78896) CONFIGURATION CONTROL APPLIES. SEE CLAUSE 52.246-9G36 (SECTION I). FLIGHT SAFETY CRITICAL PART, CRITICAL APPLICATION. ITEM DOCUMENTATION REQUIREMENTS APPLY. SEE CLAUSE 52.217-9G04. (SECTION L). PARTS MARKING IAW MIL-STD-130K, DTD 15 JAN 00. ...END OF SPECIAL INSTRUCTIONS... IDENTIFY TO: MIL-STD-130K, DATED 15 JAN, 2000. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CRITICAL ITEM - SOURCE INSPECTION REQUIRED. BEARING RESTRICTION: AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A DOMESTICALLY MANUFACTURED (U.S. OR CANADA)BEARING AND BEARING COMPONENTS (I.E., BEARING ELEMENT, RETAINER, INNER/OUTER RACE). SEE THE RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS CLAUSE (DFARS 252.225.7016). WHEN ONLY FOREIGN BEARINGS ARE AVAILABLE, THIS SOLICITATION WILL BE CANCELLED AND RE-SOLICITED IF DOD WAIVES THE RESTRICTION UPON REQUEST BY THIS ACTIVITY. Quote: Technical Characteristics (ILs) NSN : 3110-01-024-8524
MRC Requirements Reply AAJD THREAD CLASS 3A AAJF THREAD DIRECTION RIGHT-HAND AAZE SHANK DIAMETER 0.5000 INCHES MAXIMUM AAZF SHANK STYLE 651 EXTERNALLY THREADED ABHP OVERALL LENGTH 3.7850 INCHES MINIMUM AND 3.8050 INCHES MAXIMUM ABXV BORE DIAMETER 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM ADGA OVERALL OUTSIDE DIAMETER 1.3600 INCHES MINIMUM AND 1.4100 INCHES MAXIMUM ADZG LUBRICATION MATERIAL GREASE AGGY SHANK THREAD LENGTH 1.3100 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM AGVT OUTER RING WIDTH 0.4450 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM AGVU INNER RING WIDTH 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM AGXH LENGTH FROM BORE CENTER TO SHANK END 2.3950 INCHES MINIMUM AND 2.4250 INCHES MAXIMUM AGYJ SEAL QUANTITY 2 AGYK SHIELD QUANTITY 3 AGYW BEARING SEAL TYPE CONTACT AGZA ALIGNMENT TYPE SELF-ALIGNING AHAW SELF-ALIGNMENT LOCATION INTERNAL CMLP THREAD QUANTITY PER INCH 20 CQJX NOMINAL THREAD SIZE 0.500 INCHES CTLK SELF-ALIGNMENT ANGLE 10.00 DEGREES NOMINAL FEAT SPECIAL FEATURES INTERNAL CLEARANCE 0.0002 IN. MIN 0.0010 IN. MAX,KEYWAY 0.1290 IN. MAX WIDE BY 0.0860 IN. MAX DEEP CENTER LINE OF SHANK EXTENDING 1.3600 IN. MAX FROM CENTER OF BORE WITH 1.0000 IN. RADIUS,NAS 516 GREASE FITTING IN HEAD LMDC LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE MATT MATERIAL STEEL COMP E52100 INNER RING STEEL COMP 4620 ROD END BODY STEEL COMP E52100 ROLLER PLASTIC PHENOLIC SEAL STEEL COMP 430 SHIELD MDCL MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD SFTT SURFACE TREATMENT CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES STDC SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES STYL STYLE DESIGNATOR 468 SINGLE ROW, CONCAVE ROLLERS THSD THREAD SERIES DESIGNATOR UNJF |
|
| Author: | Ztex [ Thu May 19, 2011 8:53 am ] |
| Post subject: | Re: Looking for some (Boeing) bearings |
Thanks, I think that Rex number is just the bearing...we need the whole thing. Yeah, Rexnord bought Shafer and they are quoting a 50 week lead time...  The search continues....I'll bet there are a bunch of these in some warehouse....just waiting to be thrown out... Fun |
|
| Author: | Cvairwerks [ Thu May 19, 2011 11:10 am ] |
| Post subject: | Re: Looking for some (Boeing) bearings |
Zane: Aurora Bearings HXAx series might be real close to what you need. I don't know all the specs, but from the chart they look pretty close. Might need an adjustment on rod length to compensate for a little difference in OAL between the two. Since it's not an airborne application, look to the race parts supplers and rock crawler guy for other possible joints. |
|
| Author: | bdk [ Thu May 19, 2011 7:33 pm ] |
| Post subject: | Re: Looking for some (Boeing) bearings |
If you could get a copy of the drawing, you might find that the rod end is quite common. Boeing drawings are hard to get though because of their proprietary nature. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|