| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Looking for Aero 3A pylon for Skyraider https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=34782 |
Page 1 of 1 |
| Author: | Sabremech [ Sun Feb 14, 2010 1:01 pm ] |
| Post subject: | Looking for Aero 3A pylon for Skyraider |
I'm looking for an Aero 3A pylon which is used on the centerline of a Douglas Skyraider. Almost all variants of the Skyraider used this pylon. Any leads would be appreciated. David WHF Maint |
|
| Author: | Hal B [ Mon Feb 15, 2010 10:17 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Sabremech wrote: Almost all variants of the Skyraider used this pylon. David WHF Maint As opposed to the Douglas bomb ejector/pylon? |
|
| Author: | Sabremech [ Wed Feb 17, 2010 8:17 am ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Hi Hal, From all the pictures I've seen, the centerline pylon is unique. The books I have also list the Aero 3A as what is on the centerline and not in any other position. I do have a spare centerline pylon from an A4 Skyhawk I can modify in worst case scenario. David, WHF Maint |
|
| Author: | Hal B [ Wed Feb 17, 2010 10:44 am ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Our AD-4N parts book lists the centerline "Bomb & Torpedo installation" as Douglas P/N 5254272 which fits internally and is accessed in the H3ll Hole. Though some versions of the -4 used "Ejector & Rack, 14 in. installation" P/N 5430912. This version bolts up under the belly of the beast (where it will stay well lubricated) and is covered by a fairing. I assume that the Aero 3 is the unit installed on the AD-5, 6 & 7? |
|
| Author: | Sabremech [ Wed Feb 17, 2010 12:03 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Hi Hal, Thanks for those numbers. My AD-1 manual doesn't give me any of the numbers for the armament. My research has been limited to reference books and not an actual IPC as we don't have one for the AD-1. I'm curious to see some pictures of the mounting as you describe. I'll take some pictures of what I assume is the mounting on ours. Thanks, David WHF Maint |
|
| Author: | Hal B [ Wed Feb 17, 2010 10:12 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Drat, the HFM's AD just left for SoCal this morning and won't be back until after the Heritage Flight Conference; so I can't get any pics of ours. But, I''ll try to remember to copy the relevant pages from our parts book to scan for you. I haven't been able to find reference to an Aero 3A yet and I'm just trying to figure out just which one you're looking for... |
|
| Author: | Hal B [ Thu Feb 18, 2010 9:31 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
David, I've got copies of the relevant pages from the AD-4 parts book if you're interested. Just let me know and I'll scan 'em and send them off. |
|
| Author: | Sabremech [ Fri Feb 19, 2010 4:15 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Hi Hal, That would be great. You can e-mail me at Sabremech@gmail.com. Thanks, David |
|
| Author: | Hal B [ Sat Feb 20, 2010 11:43 am ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Scans sent... |
|
| Author: | Sabremech [ Sun Feb 21, 2010 9:10 pm ] |
| Post subject: | Re: Looking for Aero 3A pylon for Skyraider |
Scans received. Thank you. David |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|