Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Texan parts needed
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=33164		 Page 1 of 1
Author:  bluehawk15 [ Sat Nov 21, 2009 3:46 pm ]
Post subject:  Texan parts needed
Looking for T-6C parts. Need landing gear (especially the left), center section, and rear canopy glass. Post reply here or PM me.

Thanks!
Author:  Chunks [ Sat Nov 21, 2009 7:27 pm ]
Post subject:  Re: Texan parts needed
Mike,

I have lots of landing gear parts. Post or send me pics or part numbers of what you need and I'll try to help. Also, I want to clarify that you need rear slider canopy glass. I have the glass for the gunners canopy, but not the rear slider. I can help you with patterns if you would like, but most of what I have is crazed, delaminated or broken. Lastly, I might be able to help with a center section if you are willing to do some work on it. I have one that is plug and play but I need to keep that one for now :)

Chunks
Author:  bdk [ Sun Nov 22, 2009 12:17 am ]
Post subject:  Re: Texan parts needed
bluehawk15 wrote:
Looking for T-6C parts. Need landing gear (especially the left), center section, and rear canopy glass. Post reply here or PM me.

Thanks!

You need the whole leg, or what? I think I have 2 of one side of the upper leg and none of the other side. Don't remember which though! Also have two lowers. As far as I know it's all in decent shape, in fact one of the uppers is NOS or overhauled. I took it off the packing crate myself.

I also have two Harvard uppers without the lugs for the gear doors if anyone needs those.

Where are you located?
Author:  bluehawk15 [ Wed Nov 25, 2009 3:36 pm ]
Post subject:  Re: Texan parts needed
Here's what I've been told so far in the way of part numbers and parts needed:

P/N 07-33192 for the chrome ldg. gear piston
P/N 53862 for the fork w/o axle

These parts are needed to help get the Mosquito painted "Triple Nickel" (LTA-555) back in the air.

Thanks!
Author:  bdk [ Wed Nov 25, 2009 5:46 pm ]
Post subject:  Re: Texan parts needed
I'll see what I have on Friday when I'm out at the airport.

bluehawk15 wrote:
Here's what I've been told so far in the way of part numbers and parts needed:

P/N 07-33192 for the chrome ldg. gear piston
P/N 53862 for the fork w/o axle

These parts are needed to help get the Mosquito painted "Triple Nickel" (LTA-555) back in the air.

Thanks!
Author:  Chunks [ Wed Nov 25, 2009 10:19 pm ]
Post subject:  Re: Texan parts needed
P/N 07-33192 for the chrome ldg. gear piston - This is a Harvard pn, I have a number of the barrels, or chrome struts loose. I also have a number of complete assemblies but can't confirm their condition. It would be wise to overhaul them with new seals.

P/N 53862 for the fork w/o axle - I have 12 of these.

Let's talk turkey!

Chunks
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/