Page 1 of 1
C-47 Blueprints on Hand, what part do you need?
Posted: Thu Jul 30, 2009 9:24 pm
by noizeedave
Willing to help fellow C-47 buffs with blueprint requests. I have all rolls, and am willing to copy a few prints that you might need for your project.
PM me.
C47 Prints
Posted: Sat Aug 01, 2009 4:23 pm
by gschwartz
Hoping to find some drawings for the following areas for a "Late C-47B"
Mounting rail and beam for the astro compass (Mark II)
Radio rack/mounts - to fabricate the simpler mount trays
Details of the mounts for APN 1 and APN 2 units for Nav Station
Radio Junction Box DAC P/N 5185401
Radio CB Panel DAC 4189666
This is for the radio and Nav station restoration on C47 44-76716 delivered in April 1945. This is the Yankee Air Museum aircraft in Belleville Michigan.
If you can provide an index or sampling of the print detail available in your collection of the radio/nav positions perhaps I can narrrow down a bit what will be helpful to us. Thank You
Posted: Mon Aug 03, 2009 3:17 am
by patelie
David
Your received my PM?
Posted: Mon Aug 03, 2009 8:03 pm
by noizeedave
got it and repliedm, sry for delay, cant get my head out of the microfilm reader!
Re: C47 Prints
Posted: Mon Aug 03, 2009 8:06 pm
by noizeedave
gschwartz wrote:Hoping to find some drawings for the following areas for a "Late C-47B"
Mounting rail and beam for the astro compass (Mark II)
Radio rack/mounts - to fabricate the simpler mount trays
Details of the mounts for APN 1 and APN 2 units for Nav Station
Radio Junction Box DAC P/N 5185401
Radio CB Panel DAC 4189666
This is for the radio and Nav station restoration on C47 44-76716 delivered in April 1945. This is the Yankee Air Museum aircraft in Belleville Michigan.
If you can provide an index or sampling of the print detail available in your collection of the radio/nav positions perhaps I can narrrow down a bit what will be helpful to us. Thank You
I will look up the 2 part numbers you gave me so far, I have the rolls blocked out as to what rolls have what part number ranges on them, so it will be quick to identify. The remaining items on the list, can you get part numbers for me so i dot have to read through my books looking or get the wrong part #/
Thanks
dave
Posted: Tue Aug 04, 2009 5:26 am
by gschwartz
Dave,
Will do, It'll be a day or two ... Thanks
Grant
Posted: Thu Aug 06, 2009 2:31 pm
by gschwartz
Here are some more numbers if you have time.
Astro compass sliding mount base 4141911
" " " " bracket 4141834
" " base AN5738-2 (probably not on a Douglas print)
Thanks Grant
Posted: Fri Aug 07, 2009 12:01 am
by noizeedave
can you PM me a mailing address you want these sent to?
I will try to print them off sunday.
Dave
Posted: Fri Aug 07, 2009 2:37 am
by patelie
Grant
We found our base on ebay.