Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Dehavilland chipmunk parts needed
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=31214
Page 1 of 1

Author:  peter [ Sat Jul 25, 2009 2:19 pm ]
Post subject:  Dehavilland chipmunk parts needed

1) Windscreen!
2) Windscreed suround metalwork, or templates of the same.
3) Lower instrument panel mounts, port and stbd (just the part the panel actualy hangs on).
4) Rear cockpit mag switch bracket.
5) Rear cockpit mag swithch.
6) Small clip that holds the headset socket next to the seat.
7) Any harness components.
8) Rear harness to canopy rail attachment.
9) Firewall fuel filter assy.
10) Firewall, Vacume union and filter (large bulkhead fitting).
13) Coffman starter trigger ring assy from front cockpit.
14) Engine oil tank.
15) Canopy rail fibre stop blocks.
16) Compass light switch type 10F/11714.
17) Compass type P11 (x2).
18) Knurled instrument panel mounting nuts (x5).
19) Brake fluid header tank from firewall.
20) Large Electrical box fitted to firewall.
21) Fuel drain box from firewall.
23) Seat type Parachute packs (x2).

Any parts, in any condition at all considered, or details drawings of parts to get them manufactured if possible.
Thanks in advance for any help,

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/