Page 1 of 1
Need aircraft/parts moved?
Posted: Fri Jun 12, 2009 9:46 pm
by GARY HILTON
I am working on a load from the Mid-west to the west coast, back to the mid-west....I have space available on my trailer, so I am looking for other stuff to move, to help defray the costs for everyone involved.
If you've got something that needs moved, wheather you use me or not, I might suggest that you do it sooner than later.....as you've seen, fuel cost is slowly on the rise, and it will probably be worse than what is currently predicted...
Anyway, my next load outbound will be around the 4th of July.
If you need that pot bellied stove moved for grandma, or that Mustang relocated, give me a shout, I will move your possesions just as good as anyone else, better than most.
Gary
816 565 0575
Posted: Fri Jun 12, 2009 9:50 pm
by GARY HILTON
P.S.....Will haul for Harpoon Parts!
Posted: Fri Jun 12, 2009 9:54 pm
by retroaviation
Can you haul a Voodoo.....or at least it's wings?
Gary
Posted: Fri Jun 12, 2009 10:13 pm
by GARY HILTON
What's the measurement on the wings?....I can do it, just curious as to the size....I can haul oversized loads, but lets try to keep it under 16' wide and 16' tall, that way it really keeps the costs down!
Gary
Posted: Fri Jun 12, 2009 10:15 pm
by GARY HILTON
Forgot...yes on the rest of the airframe....I am assuming that she is dissmantled?
G
Posted: Fri Jun 12, 2009 10:17 pm
by retroaviation
I'll just zap you an e-mail, Gary.
Posted: Wed Jun 17, 2009 7:13 am
by 51fixer
Gary is a great guy and did a fantastic job for us a while back.
Rich
Posted: Fri Jun 19, 2009 2:40 pm
by Earls
Gary
I pm'd you did you get it ?
call me I have a 565lbs pallet of AN plumbing in Charlotte North Carolina I need pulled out to the Store in L.A.
Tom Neely
310 542 6435
Posted: Sun Jun 28, 2009 9:28 am
by Taigh Ramey
Hey Gary,
I need to have a large metal drafting table moved from OSH to Northern California. Can you let me know how much?
How about a 27,000 pound WWII truck from Florida to CA?
Thanks,
Taigh
Posted: Mon Jun 29, 2009 2:12 am
by GARY HILTON
Taigh,
I will need some measeurements, and an estimate on weight...I am thinking the usual table, but sometimes what a person expects turns into something totally different!
If you are serious about the truck in Fla, if I can get it on a flatbed, I can move it.....
Wish I would have known about the table sooner....I will be in Stockton, Ca shortly after the 4th .....HMMMM...Maybe we can still get it there by then....
Gary
PS...what is the width of a Beech 18 at the center section...wings removed?
Posted: Thu Jul 30, 2009 9:32 am
by GARY HILTON
Thank you David S. and Warbird Heritage, for trusting me with your precious cargo!
Posted: Thu Jul 30, 2009 7:11 pm
by 51fixer
GARY HILTON wrote:Thank you David S. and Warbird Heritage, for trusting me with your precious cargo!
I Know
I know
Pick Me (Hand raised)
Rich
Posted: Fri Jul 31, 2009 9:38 am
by GARY HILTON
Rich....Many Thanks are due to you as well! Does Jim make you work on all those motorcycles too?