| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Tail wheel id needed https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=30271 |
Page 1 of 1 |
| Author: | Stearman75972 [ Wed Jun 03, 2009 7:19 pm ] |
| Post subject: | Tail wheel id needed |
I have a Hayes Industries tail wheel that I have no idea as to its application. Info on it: Size 12.5 x 4.5 - 4.5 Ass'y D-3-275XM D-1. It was in a box of Stearman stuff I bought sight unseen. |
|
| Author: | Ken Dwelle [ Wed Jun 03, 2009 8:21 pm ] |
| Post subject: | |
Wanna sell it? If it has a small bearing and a big bearing and 4 or 5 bolts holding it together it's T-6G Ken |
|
| Author: | Stearman75972 [ Wed Jun 03, 2009 10:33 pm ] |
| Post subject: | |
It has two bearings, one on each end and the bearings are about 2" in diameter. There are six bolts holding it together. |
|
| Author: | Ken Dwelle [ Thu Jun 04, 2009 7:57 pm ] |
| Post subject: | |
Sorry, cant help with that ID. Ken |
|
| Author: | C.6-60 [ Fri Jun 05, 2009 12:39 am ] |
| Post subject: | Unknown Tailwheel |
Check your PM and get back to me. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|