| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| T-6 Flap Operating Cylinder Case https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=2851 |
Page 1 of 1 |
| Author: | HarvardIV [ Sat Feb 12, 2005 1:18 pm ] |
| Post subject: | T-6 Flap Operating Cylinder Case |
Hello Folks: I need a Flap Operating Cyllinder Case. Does anyone have a spare they could sell? Thanks, Chris |
|
| Author: | Phil Earthey [ Mon Feb 14, 2005 12:24 pm ] |
| Post subject: | Yes |
I have a spare. Drop me your e-mail and we'll see what we can do. BW, Phil |
|
| Author: | HarvardIV [ Tue Feb 15, 2005 11:30 pm ] |
| Post subject: | |
Hi Phil: Give me a price+shipping.. Thanks, Chris |
|
| Author: | Phil Earthey [ Wed Feb 16, 2005 7:25 pm ] |
| Post subject: | Flap actuator |
Two questions, 1/ Would you like it "as is" or overhauled with a new set of seals etc, and 2/ do you need just the basic flap ram cylinder, or all the actuating arms that attach to it? Thanks, Phil |
|
| Author: | HarvardIV [ Wed Feb 16, 2005 8:13 pm ] |
| Post subject: | |
Hi Phil: As is is fine, and don't need any of the internal pistons, etc. Just need to make sure of no internal pitting in the case. Thanks, Chris |
|
| Author: | Fritz Mehrer [ Mon Sep 05, 2005 8:22 pm ] |
| Post subject: | Flap cylinder |
Chris, Did you get the flap actuator cylinder you needed? Fritz San Diego |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|