Warbird Information Exchange

We have a Lord brand seat mount for our pilots seat on the A-26 we are rebuilding.

One of the mounts has seperated in two parts. The Douglas PN is 2159681, Lord PN J 1423.

Questions, does any one know where to get a new one?

Or can we just glue the rubber mount block back onto the metal base mount plate.? And if so, what type of adhesive to be used?

Kurt

_________________
A-7D, the Short Little Ugly "Flyer" and A-10A Warthog, weren't called an ATTACK plane for nothing. Remember for a little relief on the ground, call your local Air Force to "Go Ugly Early"!

Typically Lord products featured rubber molded to a metal part. It is applied to the metal part in a mold under heat and pressure. I don't know if gluing it back on will work if it takes any kind of load.
Rich

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!

Have you contacted Lord? A lot of these things are standard, they may still be made.