Harvard parts needed

keewatin_1 · **Joined:** Sun Dec 31, 2006 8:45 pm **Posts:** 4

Need front and rear sliding canopies for Mk4 Harvard

coldaffyduck · **Posted:** Mon Jan 29, 2007 8:59 pm

We have a stack of conapies for either the T-6, BT-13 or possibly Harvards. I have been meaning to get some pictures of them so we can offer them for sale. If you have any pictures of what one might look like exactly, I can tell you if we have them.

Forgotten Field · **Posted:** Fri Feb 02, 2007 3:55 pm

I think this is the front sliding section. The flat piece will need replacement, but the curved sections are good. $450.00 crated and delivered to a shipper of your choice.

Tim Savage · **Joined:** Mon May 03, 2004 8:26 pm **Posts:** 630

keewatin_1 wrote:

Need front and rear sliding canopies for Mk4 Harvard

http://www.warbird-parts.com/invent/at-6.htm

Jay is advertising front and rear sliding canopies for a T-6. Even if they are the two pane glass for an AT-6D etc, you can modify them for single pane glass. The price is certainly right.

retroaviation · **Posted:** Sun Feb 04, 2007 11:11 am

Les Chapman now has what he calls the "World's largest supply of T-6 canopies." He may have some Harvard stuff in there as well.

His number is: 800-295-2793

Gary

bdk · **Joined:** Sun May 02, 2004 1:16 am **Posts:** 11324

BTW, Harvard 4 should have the vertical canopy release on both sliders located on the forward end. The rear canopy with the "basket" handle in the middle on the bottom bar won't work with the Harvard 4's full rear instrument panel.

FF's bottom photo shows the right kind.

Warbird Information Exchange

Harvard parts needed

Who is online