Harvard parts needed
Posted: Sun Jan 28, 2007 7:30 pm
Need front and rear sliding canopies for Mk4 Harvard
Warbird Information Exchange
DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
https://www.warbirdinformationexchange.org/phpBB3/
Harvard parts needed
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=10952
Page 1 of 1
Posted: Mon Jan 29, 2007 8:59 pm
We have a stack of conapies for either the T-6, BT-13 or possibly Harvards. I have been meaning to get some pictures of them so we can offer them for sale. If you have any pictures of what one might look like exactly, I can tell you if we have them.
T6 Canopy
Posted: Fri Feb 02, 2007 3:55 pm
I think this is the front sliding section. The flat piece will need replacement, but the curved sections are good. $450.00 crated and delivered to a shipper of your choice.
Re: Harvard parts needed
Posted: Sat Feb 03, 2007 9:00 am
keewatin_1 wrote:Need front and rear sliding canopies for Mk4 Harvard
http://www.warbird-parts.com/invent/at-6.htm
Jay is advertising front and rear sliding canopies for a T-6. Even if they are the two pane glass for an AT-6D etc, you can modify them for single pane glass. The price is certainly right.
Posted: Sun Feb 04, 2007 11:11 am
Les Chapman now has what he calls the "World's largest supply of T-6 canopies." He may have some Harvard stuff in there as well.
His number is: 800-295-2793
Gary
His number is: 800-295-2793
Gary
Posted: Sun Feb 04, 2007 4:40 pm
BTW, Harvard 4 should have the vertical canopy release on both sliders located on the forward end. The rear canopy with the "basket" handle in the middle on the bottom bar won't work with the Harvard 4's full rear instrument panel.
FF's bottom photo shows the right kind.
FF's bottom photo shows the right kind.