Welcome to the trans-global aviation parts market. If you have aviation related items to sell (parts, whole aircraft, or even flying squirrels) or if you need to buy something then post a message here.
Tue Apr 26, 2016 12:43 pm
I'm looking for at least 1 ea MC-215 Drive Cable for an ARC-5/SCR-274 radio system. Length is not important. It does need to have one good end, including the spline fitting and the attach nut. As log as I can get accurate measurements off of it, I'll be happy. If you have one or more that you are willing to sell, pm me. An alternate item would be a MC-211 Right Angle Drive Adapter.
Wed Apr 27, 2016 7:49 am
If you don't get a WIXer response, check with Jay Wisler. He usually has them in stock. Not cheap, but available.
Wed Apr 27, 2016 8:51 am
Dean: I've sent him an email to see if he has them, as his list is a little wonky on the cable information. I will hopefully hear back before the end of the week. Last time I sent him an email, it was a few weeks before I got a response.
Wed Apr 27, 2016 10:05 am
Best to call Jay.
Thu Apr 28, 2016 6:48 pm
Mike Hans has some excellent information on his web site about the flexible shafts. I bet you might just find your answers here:
http://aafradio.org/garajmahal/flex_drive_cables.html
Sat Apr 30, 2016 6:29 am
Thanks Taigh for that link, it will help. The one thing that it doesn't have, though, are dimensions for the spline coupling. With that, I can have coupling either cold headed or sinker EDM'd as necessary. If I don't hear from Jay in the next week or so, I'll give him a call and see what I can find out from him on his cables. IF that isn't any success, I can always get a parts radio and pull the drive from it and measure.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.