Welcome to the trans-global aviation parts market. If you have aviation related items to sell (parts, whole aircraft, or even flying squirrels) or if you need to buy something then post a message here.
Wed Jun 25, 2008 2:10 pm
Hi, I'm new to the site and I am heading up a PBY restoration project. We are just about ready to fly again, but we have a few paperwork issues to get through before the Feds will issue an airworthiness cert.
Does anyone know where I can get a copy of this
flight manual supplement, drawing or 337 that is referenced in this paragraph
from type certificate 785:
Model 28-SACF is approved with retention of waist blisters and a
modified clipper bow at a maximum take-off and landing weight
of 27,880 lbs.
when modified per So. California Aircraft Co., Ontario, CA,,
Form ACA-337,
dated 12/27/48. Airplane Flight Manual must be revised in
accordance with
approved manual for aircraft N69043 owned by the So.
California Aircraft
Corp., Ontario, CA. When such blisters are retained, the
fixed elevator
trim tab, described in CVAC Drawing 28T15024, must not be
incorporated.
?
Also, I am looking for a picture of a 28-5ACF dataplate.
Thanks, Jake