T6 BLADES

[gabbiano]

I'am looking for two blades hamilton 6101A12

[bdk]

The Holy Grail!

You can buy them newly manufactured for about $6,000-$7,000 US each I believe (http://www.aviapropeller.com/texan.htm).

Be very careful with used blades. If the blades get too thin they cannot be overhauled and must be scrapped. There are many run-out blades for sale. If you buy, make the purchase contingent upon overhaul or inspection of the blades by a reputable shop.

I don't know if there is a definition written down anywhere, but blades are commonly rated A, B and C. "A" blades are like new. "B" blades should still have a good margin for future overhaul. "C" blades cannot be overhauled any further.

Here is a complete prop advertised:

http://www.barnstormers.com/listing.php?mode=usersearch&user=bmay%40keewatinair.ca&PHPSESSID=88bd53a5ca5b5277af9d1847f60f1da3

[gabbiano]

The Holy Grail!

You can buy them newly manufactured for about $6,000-$7,000 US each I believe (http://www.aviapropeller.com/texan.htm).

Be very careful with used blades. If the blades get too thin they cannot be overhauled and must be scrapped. There are many run-out blades for sale. If you buy, make the purchase contingent upon overhaul or inspection of the blades by a reputable shop.

I don't know if there is a definition written down anywhere, but blades are commonly rated A, B and C. "A" blades are like new. "B" blades should still have a good margin for future overhaul. "C" blades cannot be overhauled any further.

Here is a complete prop advertised:

http://www.barnstormers.com/listing.php?mode=usersearch&user=bmay%40keewatinair.ca&PHPSESSID=88bd53a5ca5b5277af9d1847f60f1da3

[bdk]

An overhauled prop with -12 blades on Barnstormers:

http://www.barnstormers.com/ad_manager/ad_detail.php?ID=181851