Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Fri May 02, 2025 8:21 pm

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Wed Aug 08, 2012 10:45 am 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Thu May 10, 2007 6:08 pm
Posts: 2595
Location: Mississippi
I think you guys are making things up. I know I'm tone deaf but I just can't seem to tell the difference between a radial and an inline engine. Can someone explain or maybe post some videos or audio files so I can compare and see if I can learn to tell the difference?


*is sooooo ashamed*

_________________
"I knew the jig was up when I saw the P-51D-20-NA Mustang blue-nosed bastards from Bodney, and by the way the blue was more of a royal blue than an indigo and the inner landing gear interiors were NOT green, over Berlin."


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 11:00 am 
Offline

Joined: Sun Dec 17, 2006 6:10 pm
Posts: 531
Location: Portersville, PA
Like these?
http://www.youtube.com/watch?v=ghWrG3tW9LE


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 11:30 am 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Thu May 10, 2007 6:08 pm
Posts: 2595
Location: Mississippi
I just can't tell the difference. :(

http://www.youtube.com/watch?v=EhQ1XmUj ... re=related

_________________
"I knew the jig was up when I saw the P-51D-20-NA Mustang blue-nosed bastards from Bodney, and by the way the blue was more of a royal blue than an indigo and the inner landing gear interiors were NOT green, over Berlin."


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 11:38 am 
Offline

Joined: Sun Dec 17, 2006 6:10 pm
Posts: 531
Location: Portersville, PA
Try to distinguish the individual short exhaust inline bark to the radial which sometimes has a exhaust collector, i.e. T-6.


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 11:46 am 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Tue Jul 17, 2007 9:11 pm
Posts: 3160
Location: MQS- Coatesville, PA
muddyboots wrote:
*is sooooo ashamed*

Ya ought to be :D

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 11:59 am 
Offline
Long Time Member
Long Time Member

Joined: Sat Dec 22, 2007 12:36 am
Posts: 7961
Location: Mt. Vernon, WA.
If you've got a good 'ear' you can tell single row radials from twin rows even WRIGHTS from PRATTS or Russian radials like on the CJ-6 Shenyang/various YAKS, ALLISONS from MERLINS. I really can't discern, nor do I really care to, a CONTINENTAL flat motor from a LYCOMING flat motor.
You can also tell what the engine is on by the exhaust 'report' and 1820's on a HU-16 have a different note from an S2, a 985 on a BEAVER sounds different than one on a Beech 18, or a 985 from a slow turning WRIGHT R-975. There's a local guy with a TRAVELAIR and that old 975 sounds so relaxed and like it's not working hard, and it's different in tone than another local guy with a really nice PT-17 with a Continental radial.
When I lived just off KPAE I got to see and hear what FHC was presenting on a particular 'fly day' as they'd take the subject airplanes out early in the morning of to make sure everything worked as planned, and I loved the sounds coming from the 1820-ski mounted on the Il-6 RATA because it sounds to me like a big hardwood block rolling around in a slowly turning wooden drum, and the DB-601 on the 109 has a bell like background 'ring' to it. ALLISON. basso, MERLIN higher pitched and 'busy'.
THE most distinctive sounds I ever heard were from a B-36 passing overhead when I was a kid in the mid 50's, to this day it's as distinctive as the smell of brake fluid, and why I turn up the surround sound early on in STRATEGIC AIR COMMAND when it's on TCM to make the house just shake for a few seconds. :D :D :D :D pop2
And if you could figure out a way to bottle the sounds of a DC-6 taxiing with all 4 2800's burbling at idle and sell it to kids with CAMAROS you could make a fortune!!
A 2800 sounds sweet, two 2800's is better, but ain't nothing that sounds bettter than 4 2800's pulling takeoff power!

_________________
Don't make me go get my flying monkeys-


Last edited by The Inspector on Wed Aug 08, 2012 2:42 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 12:39 pm 
Offline
User avatar

Joined: Sun May 18, 2008 11:59 am
Posts: 605
Location: West Hammond, Illinois, USA
When I hear a round engine I jump right up and run out side.

Sometimes you can hear them a long way off.

There are T-28s and AT-6/SNJ Texans that fly around here near Lansing (IGQ) every now and then.

The Texan flew over last Sunday.

_________________
.
.
.

"Welcome back Mr. Lasky."


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 12:45 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Mon Feb 13, 2006 9:42 pm
Posts: 2707
Location: NP, NJ, USA
muddyboots I'd say your best bet for learning the difference would be to visit an airshow featuring alot of Warbirds and listen carefully.

_________________
Share your story: Rutgers Oral History Archive http://oralhistory.rutgers.edu/


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 1:00 pm 
Offline
User avatar

Joined: Mon Jul 05, 2010 1:28 am
Posts: 439
Location: Galena Park Texas
TonyM wrote:
When I hear a round engine I jump right up and run out side.

Sometimes you can hear them a long way off.

There are T-28s and AT-6/SNJ Texans that fly around here near Lansing (IGQ) every now and then.

The Texan flew over last Sunday.

I do the same thing! The inline liquid cooled engines just sound like someone driving in a hot rod car to me. They have a high pitched perfectly timed drone to them and they sound high revving. The radials always sound like a huge 4 cylinder car engine from the teens or twenties or some kind of low revving/low compression engine. They seem to have a much deeper bass sound with a lot less of a perfect beat than the v12's. They seem to produce all sorts of odd noises. I've only got one ear working and its starting to loose treble sounds from to many years of hammering on sheet metal. But, if the distinct sound of a radial engine is flying anywhere near me, I run out of the door to see what is out there.

_________________
The nose art/aviation artist and general lunatic from Houston, Texas http://www.jasonbarnettartist.com


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 1:58 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Sun Aug 13, 2006 7:11 pm
Posts: 2670
Location: Port Charlotte, Florida
I can actually tell the difference between a Spitfire and a Mustang passing overhead. They really do have a somewhat different sound, probably due to the differences in the propeller. Allisons and Merlins sound very different from each other. I can also tell the difference between small and large radials, though I haven't yet learned how to tell a Wright from a P&W. I've also observed that from a distance, some radials sound a lot like a Harley at cruise.

I love 'em all! :D

_________________
Dean Hemphill, K5DH
Port Charlotte, Florida


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 2:39 pm 
Offline
Long Time Member
Long Time Member

Joined: Sat Dec 22, 2007 12:36 am
Posts: 7961
Location: Mt. Vernon, WA.
k5dh wrote:
I can actually tell the difference between a Spitfire and a Mustang passing overhead. They really do have a somewhat different sound, probably due to the differences in the propeller. Allisons and Merlins sound very different from each other. I can also tell the difference between small and large radials, though I haven't yet learned how to tell a Wright from a P&W. I've also observed that from a distance, some radials sound a lot like a Harley at cruise.

I love 'em all! :D

At Abottsford one year I got to hear MERLINS on a P-51, a HURRICANE, a SPITFIRE, and a LANCASTER in the same piece of air and each had a very distinctive sound and tone.

Since GM 'improved' the SBC by changing the head configuration, port shapes and spacing, intake port shapes and locations, changed the firing order, and moved the distributor to the front of the engine you can't tell one from a SBF that they are copying, a 'traditional' SBC has a raspy mid tone to it under full throttle that's now missing from the SB-7 engines.

_________________
Don't make me go get my flying monkeys-


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 5:31 pm 
Offline
2000+ Post Club
2000+ Post Club

Joined: Wed Oct 10, 2007 11:27 am
Posts: 2463
Location: Ellerslie Georgia, USA
muddyboots wrote:
I just can't tell the difference. :(



Please... geek ..Let us Pray :D that this poor poor man is healed.... :axe: .....like soon :supz:

_________________
Kind Regards,
Gary Lewis
J.A.F.O.


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 6:16 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Thu May 10, 2007 6:08 pm
Posts: 2595
Location: Mississippi
Hey, I have rifleman's ear. I can tell the difference between mortar's when they're fired, a rifle or machine gun is no big deal. Butwhen it comes to those things taht buzz around in the air keeping me awake at night I can't hear the difference :P

_________________
"I knew the jig was up when I saw the P-51D-20-NA Mustang blue-nosed bastards from Bodney, and by the way the blue was more of a royal blue than an indigo and the inner landing gear interiors were NOT green, over Berlin."


Top
 Profile  
 
PostPosted: Wed Aug 08, 2012 6:24 pm 
Offline
Long Time Member
Long Time Member

Joined: Sat Dec 22, 2007 12:36 am
Posts: 7961
Location: Mt. Vernon, WA.
muddyboots wrote:
Hey, I have rifleman's ear. I can tell the difference between mortar's when they're fired, a rifle or machine gun is no big deal. Butwhen it comes to those things taht buzz around in the air keeping me awake at night I can't hear the difference :P

If the buzzing is very high pitched and only heard at night when the lights are out.....it's time to fix the window screen. just my 2c

_________________
Don't make me go get my flying monkeys-


Top
 Profile  
 
PostPosted: Thu Aug 09, 2012 12:47 am 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Wed Jan 19, 2011 12:27 am
Posts: 5592
Location: Eastern Washington
carlisle1926 wrote:
I do the same thing! The inline liquid cooled engines just sound like someone driving in a hot rod car to me. They have a high pitched perfectly timed drone to them and they sound high revving. The radials always sound like a huge 4 cylinder car engine from the teens or twenties or some kind of low revving/low compression engine. They seem to have a much deeper bass sound with a lot less of a perfect beat than the v12's.



You took the words out of my mouth.
Merlins (about the only in-lines I hear) have almost a whine to them...radials have a rumble and to add to your excellent description, a low speeds you can almost hear every piston firing.

Another comparison you might get from watching Speed TV one weekend. Merlins are like Formula 1 cars, radials are like dragsters inching up to the staging lane.

_________________
Remember the vets, the wonderful planes they flew and their sacrifices for a future many of them did not live to see.
Note political free signature.
I figure if you wanted my opinion on items unrelated to this forum, you'd ask for it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 325 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group