Warbird Information Exchange

Yes, yes, I know, everyone is after Mustang parts. However, we've recently taken delivery of the remains of a long forgotten CAC Mustang and are keen to obtain the following:

Doghouse & airscoop
Tail cone
Horizontal stab
Canopy front hoop
Ailerons
Engine mount parts

Incomplete examples or damaged is fine. We have a full set of drawings so can produce a lot of what we need from new, but it's always nice to have a starting point to work from - you can't beat a three dimensional drawing.

Additionally, we have a set of fabric covered elevators. These are too early to be applicable to our aeroplane, but can they be modified to take metal covering, and if so, what needs to be done?

Also after a Cavalier parts manual if anyone has one available, or just a good copy.

Thanks

Be interested in details of the aircraft, by PM if you'd rather. May be able to pass on contact details in return.

Regards,

_________________
James K

"Switch on the underwater landing lights"
Emilio Largo, Thunderball.

www.VintageAeroWriter.com

Check my web site to see what we have for the P-51

_________________
GOOD MORNING, WELCOME TO THE UNITED STATES OF AMERICA
Press "1" for English.
Press "2" to disconnect until you have learned to speak English.