(3) T-33's for sale

valdez25 · **Posted:** Tue Mar 17, 2009 9:40 pm

(3) T-33's for sale. $22,000 each. Contact Joe at 909-597-3313

A2C · **Posted:** Wed Mar 18, 2009 1:47 am

Airworthy? I guessed about $25k for airworthy T-33 about 3 months ago, and noone believed it. Everyone said they NEVER saw one that cheap, and ONLY for around 150k or higher.

daveymac82c · **Posted:** Wed Mar 18, 2009 2:11 am

more info?

- David

The Inspector · **Posted:** Wed Mar 18, 2009 2:22 am

Which is why what used to be $2 million dollar HEMI 'CUDA convertables @ Barret-Jackson now bring only upper level 6 figues, it's the economy and it looks like someone is trying to dump his 'solid gold' investment from a few year ago-

P51Mstg · **Joined:** Tue Jan 25, 2005 11:36 am **Posts:** 1202

The SOLID GOLD investment from 3 years ago would have been gold, its about tripled in value........

I could never see a reason for 6 figure hemi cars. I had a 69 Charger back in HS in 1976 and it was fun, but nothing like a new (2009) Corvette. No comparison whatsoever....... Lost interest in all the old cars.

But not the planes.

Mark H

BHawthorne · **Posted:** Wed Mar 18, 2009 8:19 am

I wish I had $22k, but I'm unemployed atm.

SuperGuppy · **Posted:** Wed Mar 18, 2009 8:23 am

BHawthorne wrote:

I wish I had $22k, but I'm unemployed atm.

Welcome to the Club !!!!

:cry:

Nathan · **Posted:** Wed Mar 18, 2009 9:18 am

SuperGuppy wrote:

BHawthorne wrote:

I wish I had $22k, but I'm unemployed atm.

Welcome to the Club !!!!

:cry:

\

well i am lucky to have a job. But not sure its worth it when they give you 16 hours a week!

It used to be 30. :roll:

TAdan · **Posted:** Wed Mar 18, 2009 9:25 am

19.5 hours here :roll:

Fortunetly I go to school p/t...

I saw a decent looking T-33 project on Courtesy for 60k. http://www.courtesyaircraft.com/

The 20k range sounds alot better. It would be fun to get one to play/ learn the basics with and make it a static display. No where to put it though...

6trn4brn · **Posted:** Wed Mar 18, 2009 9:29 am

Dang fellas...hate to stray away from the topic of this thread, but we are begging for help! If you have experience on CNC machines with FANUC controls, we could certainly use your help. And, we are a defense contractor...making parts for the JSOW (bunker buster bombs), 155mm howitzer and all sorts of other military components. Either visit our website at WegmannUSA or go over to Monster.com to view our help wanted ad. (if ya like overtime...we are working 7 days a week!)

Now, back to your regularly scheduled programming

mlenoch · **Posted:** Wed Mar 18, 2009 10:26 am

Wegmann.....nice website!
(How does the Leopard compare to the Abrams?)
Thx,
VL

jet1 · **Posted:** Wed Mar 18, 2009 2:29 pm

I just sold my ranch, i can buy them...but then I wouldn't have any place to keep them cause I sold the air strip on the ranch.....

.....I almost kept it but two years ago who would have guessed we would be in a depression today.

BHawthorne · **Posted:** Wed Mar 18, 2009 10:59 pm

6trn4brn wrote:

Dang fellas...hate to stray away from the topic of this thread, but we are begging for help! If you have experience on CNC machines with FANUC controls, we could certainly use your help. And, we are a defense contractor...making parts for the JSOW (bunker buster bombs), 155mm howitzer and all sorts of other military components. Either visit our website at WegmannUSA or go over to Monster.com to view our help wanted ad. (if ya like overtime...we are working 7 days a week!)

Now, back to your regularly scheduled programming

I've got a degree in Manufacturing Engineering with basic experience using Funuc controllers on CNCs. My background is mostly in CATIA, FeatureCAM and MasterCAM though.

6trn4brn · **Posted:** Wed Mar 18, 2009 11:23 pm

Thanks Vlado...I think...I honestly have not visited our website since I started working there about 6 months ago. Wish I could talk about all of the extraordinarily cool stuff that we make. Tell ya what, you bring Moonbeam down here, take me up for a flight over the Blue Ridge mountains and I will tell ya all about what we make. :twisted:

Wonder if we could fit some JSOWs to Moonbeam as well :shock:

Our vice president has a very nice 182 with the long range tanks...

Mr Hawthrone...right now we are looking for experienced CNC machinists. We do use MasterCam for all of our programming though. And, believe me, all of the machinists think we can never have enough process engineers/programmers. We have two brand new, very large (expensive) Mori Seiki pieces of equipment coming in within the next month...WOOHOO! Mori Seiki is the Ferarri of CNC equipment.

Sorry fellas...I strayed waaaay off the topic of this thread. If anyone is truly interested, visit one of the above sites or PM me and I can give you the email of our HR person for your resume'.

bdk · **Joined:** Sun May 02, 2004 1:16 am **Posts:** 11319

valdez25 wrote:

(3) T-33's for sale. $22,000 each. Contact Joe at 909-597-3313

Military Aircraft Restoration
(909) 597-3313
7000 Merrill Ave, #17, Chino, CA 91710

Warbird Information Exchange

(3) T-33's for sale

Who is online