Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Fri Dec 05, 2025 1:03 am

View unanswered posts | View active topics


Board index » General Discussion » The WIX Hangar

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
Django
PostPosted: Sat Jan 20, 2007 11:18 am 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Thu May 18, 2006 3:08 pm
Posts: 4542
Location: chicago
Typically, what color are fuel tanks in B-24s or B-25s? Were they by chance red, since AN fittings are blue or red?
Top
 Profile  
 
Tim Savage
PostPosted: Sat Jan 20, 2007 11:46 am 
Offline
User avatar

Joined: Mon May 03, 2004 8:26 pm
Posts: 632
Django wrote:
Typically, what color are fuel tanks in B-24s or B-25s? Were they by chance red, since AN fittings are blue or red?



Black rubber.
Top
 Profile  
 
Fouga23
 Post subject:
PostPosted: Sat Jan 20, 2007 12:59 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Sat Dec 16, 2006 8:49 am
Posts: 1635
Location: Belgium
LOL

_________________
Magister Aviation
It's all in my book

Image
Top
 Profile  
 
Paul Patist
 Post subject:
PostPosted: Sat Jan 20, 2007 1:26 pm 
Offline

Joined: Sun May 02, 2004 4:59 pm
Posts: 175
Location: Oudkarspel, The Netherlands
Like Tim said it should be self sealing black rubber.
@Tim from Belgium why this response? Tim asked a serious question.

_________________
Associate member of the Awon
http://www.awon.org/
__________________

Aero Part Identify Board
http://www.iphpbb.com/board/fs-81805422nx79380.html

"Once you have flown, you will walk the earth with your eyes turned skyward, for there you have been, there you long to return."

Leonardo Da Vinci (1452-1519)
Top
 Profile  
 
Paul Patist
 Post subject:
PostPosted: Sat Jan 20, 2007 1:31 pm 
Offline

Joined: Sun May 02, 2004 4:59 pm
Posts: 175
Location: Oudkarspel, The Netherlands
Of course I meant Django...

_________________
Associate member of the Awon
http://www.awon.org/
__________________

Aero Part Identify Board
http://www.iphpbb.com/board/fs-81805422nx79380.html

"Once you have flown, you will walk the earth with your eyes turned skyward, for there you have been, there you long to return."

Leonardo Da Vinci (1452-1519)
Top
 Profile  
 
Fouga23
 Post subject:
PostPosted: Sat Jan 20, 2007 1:57 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Sat Dec 16, 2006 8:49 am
Posts: 1635
Location: Belgium
Paul Patist wrote:
Like Tim said it should be self sealing black rubber.
@Tim from Belgium why this response? Tim asked a serious question.

I know, just put a smile on my face. Painted what color-->rubber. nevermind, I'll get me coat :D
Not trying to make fun of this thread or the person who asked. Just gave me a welcome smile :)

_________________
Magister Aviation
It's all in my book

Image
Top
 Profile  
 
skymstr02
PostPosted: Sat Jan 20, 2007 2:46 pm 
Offline
User avatar

Joined: Sat Sep 24, 2005 10:54 am
Posts: 920
Location: Madison, MS
Django wrote:
Typically, what color are fuel tanks in B-24s or B-25s? Were they by chance red, since AN fittings are blue or red?


AN fittings came out after WWII. The common flared fitting then was the AC fittings, which were gray in color. Fuel supply systems didn't traditionally use flared fittings either, they used beaded piping and hose couplings and hose clamps. This was common with the fuel bladder equipped aircraft.

_________________
If God had wanted man to fly behind a flat motor, Pratt Whitney would've built one.
Top
 Profile  
 
Cvairwerks
 Post subject:
PostPosted: Sat Jan 20, 2007 11:03 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Mon Jun 14, 2004 8:41 pm
Posts: 1487
Location: North Texas
Actually, the military adopted the AN standard in the early 1930's, but with the 3A/3B thread and were also known as JIC fittings. Later, in 1947 I think, the standard was updated to the 2A/2B thread and was also adopted as an SAE standard with it's own number.

Parker has a nice little history of the standard on one of their websites.
Top
 Profile  
 
Django
 Post subject:
PostPosted: Tue Jan 23, 2007 12:03 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Thu May 18, 2006 3:08 pm
Posts: 4542
Location: chicago
Black cause they were self sealing.. DUH. :lol: I really should have known better. :lol:
Top
 Profile  
 
TimAPNY
 Post subject:
PostPosted: Tue Jan 23, 2007 12:13 pm 
Offline
WRG Staff Photographer & WIX Brewmaster
User avatar

Joined: Fri Jun 04, 2004 8:57 am
Posts: 3532
Location: Chapel Hill, TN
Check out this site: http://www.marengometalworks.com/MMWWRD ... /index.htm

Some of the pictures are of tanks removed from the B-17 recovered out of Canada. I'm sure Chuck G can fill any details about the pictures. I foound that shots very interesting!

Tim

_________________
www.tailhookstudio.com
Top
 Profile  
 
ehokuf
 Post subject:
PostPosted: Tue Jan 23, 2007 7:48 pm 
Offline
User avatar

Joined: Sat Jan 28, 2006 11:10 pm
Posts: 52
Location: Bemidji MN
Funny thing is not all were Black! Some were a tan/gray color almost silver. Have tanks to prove it and many pics. Yes these were the self sealing type and no they were not faded because the stenciling was in black ink.

Great question!

Details are fun and love it when know-it-all's prove that they have lot learn! (Fouga23)
Top
 Profile  
 
Django
 Post subject:
PostPosted: Wed Dec 31, 2008 12:09 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Thu May 18, 2006 3:08 pm
Posts: 4542
Location: chicago
Cvairwerks wrote:

Parker has a nice little history of the standard on one of their websites.


Can anyone help me find this? I tried on their website, but I am not finding it. I did find this link through google, but it is a dead link.
http://www.parker.com/tfd/fittingsoluti ... TTINGS.pdf

_________________
.
.
Sure, Charles Lindbergh flew the plane... but Tom Rutledge built the engine!

Visit Django Studios online or Facebook!
Top
 Profile  
 
WacoOne
 Post subject:
PostPosted: Wed Dec 31, 2008 4:37 pm 
Offline

Joined: Thu Dec 25, 2008 9:39 am
Posts: 41
Location: Pensacola, FL
Try Parker Hannefin
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » General Discussion » The WIX Hangar

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 114 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB® Forum Software © phpBB Group