
ok ok I get the hint

Sorry, been flat chat at work and sweating my a*s off
Since Rossco started it..lets see if i can give some more info
We arrived around 10 am ( i think) before the heat of the day set in.
Site one was apparently the location of two hangers during the war, and immediately after was converted as a dissasembly area and smelter
Those are the pics shown by Rossco

now being the forward thinking person I am...... i bought my trusty metal detector along and within seconds we had our first "hit". Ok it was a bolt but it was a start ...now with every swing the headphones quaked with the sweet beep of buried treasure below. With youthful enthusiasm, adrenaline pumping and an almost religious fervour volunteers magically grabbed any and all picks and shovels..those that didn't get one used there hands and started swinging and scraping away...each scoop of earth yielding discarded relics of once proud and mighty warplanes. Cabling , nuts/bolts , tubing, engine parts, mounting brackets , bakelite trim wheels and even brass ID plates were duly collected dusted off and placed in the now quickly growing pile of what one would call "junk" but to us afficiendos of all things warbird.......
treasure
Close up of our pile
Volunteers hard at work
More parts
Panelling and slipper hook for drop tank
More bits
So after about 2 hours of digging, Rossco decides to show us the sites of the old area. Conveniently I left my detector on, and was rewarded with a nice blast
A quick dig reveled this part from a kittyhawk
Turning the object around revealed its already known but now physically shown scars of its demise
Anyway, a quick scan of the areas surrounding our dig site showed many parts still lying on the ground where they were unceremoniously dumped after stripping from the aircraft.
P-51Mustang filter
Engine parts
odds and sods
Moving on to another area
Misc parts at site
My turn to supervise
fellow Boomer restorer and good mate inspecting his personal haul
Spitfire armour plate
More spit bits
Parts sitting in decomposing aluminium dross
Appears to be Gun bay bits
Tubing
So anyway, after another hour or so of this we all packed up and went to the relative comfort of the restoration hanger for lunch and relaxation
This was a perfect opportunity for me to revist Rossco's bold and exciting "phoenix" spitfire project that his team have been assembling; and to see the progress made since my last expeditious visit.
So thanks again to Rossco and his team for inviting me out on this field trip. It was a humbling yet somewhat adrenalising excursion to the other side of the fence; and one that I had dreamed of since I was 6 after being told the tales and shown the photos of thousands of Spits, Boomers,Mustangs and Kittyhawks that were parked in their hundreds in straight rows..... once a long time ago.
My only regret is no Boomer parts

and my hope is that from this trip some of the parts will no longer be neglected and unloved and make their way home onto Rosscos airplane to be admired for what they are for the generations yet to come.