Rauhbatz wrote:
Hi all...here is our current status:
+ Archie at the USAF Archives is doing research on the aircraft movements...
+ Mike B went and did another inspection...oddly enough this is a B model with a D model tail. Did the tail section come apart just like the F-100s/F-86s? If so that would explain this difference.
+ Mike B has a plan for filling in some of the gaps in the tail section...we are going to repair some of the metal and then cap the open jet exhaust w a modified trash can lid.
+ Our research so far shows that Ohio never had any guard/active units with F-105s...so there are two choices for color schemes:
1. Std SEA three tone camo
2. Hi-viz metal
The latter poses an interesting problem. While we can get the paint from Home Depot/Lowes for the three tone camo, Mike and I discussed how to paint an alumimun finish. Not knowing any houses that are painted in a bright shiny silver, we were curious how to approach this option. I recollect a few years back when we started on the F-4 I looked at some form of roof paint that was a pretty close match to natural metal.
Any steer on the above item welcome...I don't think Testors or Gunze makes silver model paint in gallon jugs!
In any case we will see what Archie says but we can start powerwashing once we get final approval from the airport...should be forthcoming this week
I could be totally off base on this, but I believe that the F-105B/JF-105B/F-105D all had the same (or at least very similar tail), with the F-105F/G being the only airframe to have a different tail. In any case the all "broke" in the same location, which was close to the trailing edge of the wing.
As far as paint, I would stay away from a "bright" silver. Prior to camo the Thud and Hun were painted in an overall silver lacquer. That was due to corrosion in the airframes, so they were painted silver about 1962/63 onward. That was accelerated during "Operation Look-a-like" following the crash of the Thunderbird F-105B. The silver used had a grayish, semi-gloss appearance.
When I painted the F-84F in a SEA camouflage scheme I used an acrylic made by Sherwin Williams. It was fairly easy to spray and has held up in the desert sun quite well. After two summers the placards and warning markings I painted in enamel are fading, but the camo looks great.
The New Jersey Air Guard operated F-105Bs in both silver and in SEA scheme, so you could go either way with that airframe and be correct.
_________________
Had God intended for man to fly behind inline engines, Pratt & Whitney would have made them.
CB
http://www.angelfire.com/dc/jinxx1/Desrt_Wings.html