| 
					
						 Need the following for our Hurricane XII, to be flying in the spring:
    *   Tachometer - Pioneer Gauge with RPM range 0 to 4000   *   Oxygen bottle Tee Fitting - Tee fitting that comes out the top of the oxygen bottle, 1/2" BSPT at the base, 1/4" BSPP on the tee ends. Usually made of brass.   *   Manifold pressure gauge - Not sure who made these gauges. It does have 'CANADA' on the face with a range of -10 to 0 to 16 PSI   *   Vertical Speed Indicator - Made by pioneer, range is 0 to 6000 up and down   *   Electric thermometer - Goes in the coolant tank. Similar to the capillary type temp. probe but has a 2 or 3 pin connector on it.   *   Rubber dust boots -  For throttle and mixture control siding rods, they are about an inch long and .5" wide.   *   Double acting valve rubber connectors - These rubbers are about .5" big on one end and 1" on the other.   *   Voltmeter - PN: 5Q/1693 24V gauge. Same as Spitfire. Range should go to 40V   *   Stbd side landing gear catch - This part screws into the axle of the landing gear leg and get caught by the snapjack to keep the landing gear locked up in flight. Its a sided part so its not interchangeable with the port side one.   *   12 Browning .303 British machine guns?? Kidding!...Kinda
  Please send me a PM.
  Thanks, 
  Dave 
					
  
						
					 |