| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Aircraft Metal https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=50928 |
Page 1 of 1 |
| Author: | Silverplate [ Mon Sep 30, 2013 1:42 pm ] |
| Post subject: | Aircraft Metal |
I have a small section of aircraft skin from a DC6 I am polishing out for display. Is there anything that can be used to coat the finish to mainatin its shine when done. Thanks...Mike |
|
| Author: | ZRX61 [ Tue Oct 01, 2013 6:08 pm ] |
| Post subject: | Re: Aircraft Metal |
If it's going to be displayed inside it should be fine as it is. |
|
| Author: | rtwpsom2 [ Tue Oct 01, 2013 7:01 pm ] |
| Post subject: | Re: Aircraft Metal |
Testor's Clearcote is a glossy spray paint cleat coat for modeler makers in a rattle can. But that might be more than you need. You can also try using Future Floor Polish and re-apply once a year or so. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|