Warbird Information Exchange

I am looking for any information or a wiring diagram for the generator / voltage regulator for the early AT-6 12 volt system. As our BT-15 uses the same regulator and we are having trouble getting the generator to charge the generator has been removed and bench tested and shows to have 50amp output. Have a new regulator. Any help would be appreciated please e-mail me at MustangMike@tx.rr.com
Thanks Mike

PM sent . Check your e-mails


plankwings

Thanks for the wiring and pictures that is identical to what we areusing on the BT-15

Chech the reverse current relay, also I had a 6 driving me batty with a charging problem, turned out the carbon pile base was wired wrong.