| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Scott Type A-21 regulator https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=48918 |
Page 1 of 1 |
| Author: | Ollie [ Mon Feb 25, 2013 12:43 pm ] |
| Post subject: | Scott Type A-21 regulator |
I just received my regulator, and I was wondering if any of you guys have any experience with it. I'm guessing that the threaded connection goes to the bottle and the conical one is for the mask.  Scott Type A-21 oxygen regulator by comiquaze, on Flickr  Scott Type A-21 oxygen regulator by comiquaze, on Flickr 
|
|
| Author: | RAMC181 [ Fri Mar 01, 2013 2:17 pm ] |
| Post subject: | Re: Scott Type A-21 regulator |
Threaded connection is to the bottle, the mask connection is under the flip-cap next to the mixture control. The conical connector is for filling the bottle IIRC. All the best, PB |
|
| Author: | Ollie [ Sun Mar 03, 2013 9:57 am ] |
| Post subject: | Re: Scott Type A-21 regulator |
Thank you for the reply. Do you know what the 42M and 30M settings are for? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|