| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Grumman Aileron https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=48116 |
Page 1 of 1 |
| Author: | Obergrafeter [ Wed Dec 12, 2012 7:34 pm ] |
| Post subject: | Grumman Aileron |
HELP.....................I am covering a Grumman Albetross aileron and cannot find any of the mechanical fastners that hold the fabric to the ribs. They come in a continuous roll much like Martin clips but apparently Grumman had their own way of doing things. The Martin clips are for 3" spacing(ie. slow planes) and the Grummans are one inch spacing. The manufacturer for the Martin clips will not even consider re-tooling to make the Grumman clips.(I would think he has made all the Martin clips he could ever sell in my lifetime in about five minutes.) Short of manufacturing my own (don't think I have the skills required) does anyone have any ideas. Yes I know we could stitch it, if the local FSDO would buy off on that, but would rather go back "factory". Wayne (210)313-4759 |
|
| Author: | The Inspector [ Wed Dec 12, 2012 9:06 pm ] |
| Post subject: | Re: Grumman Aileron |
Obergrafeter wrote: HELP.....................I am covering a Grumman Albetross aileron and cannot find any of the mechanical fastners that hold the fabric to the ribs. They come in a continuous roll much like Martin clips but apparently Grumman had their own way of doing things. The Martin clips are for 3" spacing(ie. slow planes) and the Grummans are one inch spacing. The manufacturer for the Martin clips will not even consider re-tooling to make the Grumman clips.(I would think he has made all the Martin clips he could ever sell in my lifetime in about five minutes.) Short of manufacturing my own (don't think I have the skills required) does anyone have any ideas. Yes I know we could stitch it, if the local FSDO would buy off on that, but would rather go back "factory". Wayne (210)313-4759 What's the spacing on DC-6/7 elevator/rudder ribs? |
|
| Author: | Sabremech [ Mon Dec 17, 2012 12:04 pm ] |
| Post subject: | Re: Grumman Aileron |
Hi Wayne, Do you have a P/N for the clips? David WHF Maint |
|
| Author: | Obergrafeter [ Mon Dec 17, 2012 10:13 pm ] |
| Post subject: | Re: Grumman Aileron |
I will see what I can find. Got it...................SP2125-1 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|