| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| part for a T-28 needed https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=45148 |
Page 1 of 1 |
| Author: | N618TL [ Thu Apr 05, 2012 4:55 pm ] |
| Post subject: | part for a T-28 needed |
anyone have part # 159-31134-7 it is a 64 ins long extrusion for the nose gear door area with a slight curve up at the front, last 20 ins curve up about 1 ins |
|
| Author: | P51race38 [ Fri Apr 20, 2012 1:09 pm ] |
| Post subject: | Re: part for a T-28 needed |
I know a guy. I'll have a look for you. |
|
| Author: | cooper9411 [ Sat Apr 21, 2012 8:16 pm ] |
| Post subject: | Re: part for a T-28 needed |
The weekend of April 28-29 I am going to be working on an aircraft in northeast Ohio (again) and last time I was there, there was one partial and one complete T-28, neither were airworthy. Looks like they have been sitting for many years. If they are still there I will see if either has the part you are after. |
|
| Author: | P51race38 [ Wed Apr 25, 2012 12:01 pm ] |
| Post subject: | Re: part for a T-28 needed |
I just contacted my T-28 guru and I'll get back to you soon if you still need it. |
|
| Author: | P51race38 [ Wed Apr 25, 2012 12:21 pm ] |
| Post subject: | Re: part for a T-28 needed |
I need more info. Like what figure # in the book. Nose gear area not enough. |
|
| Author: | T-28mike [ Thu May 10, 2012 9:41 am ] |
| Post subject: | Re: part for a T-28 needed |
N618TL wrote: anyone have part # 159-31134-7 it is a 64 ins long extrusion for the nose gear door area with a slight curve up at the front, last 20 ins curve up about 1 ins PM sent |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|