| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| bent display prop fix https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=43044 |
Page 1 of 1 |
| Author: | jtramo [ Mon Oct 24, 2011 10:46 pm ] |
| Post subject: | bent display prop fix |
I have a nice three blade prop with three nearly evenly bent blades. I either want to bend em all straight (preferred) or bend one or two a bit to even them up for a coffee table. Any thoughts on heating to bend or will that make the alum too brittle and crack them? |
|
| Author: | The Inspector [ Sat Oct 29, 2011 10:58 pm ] |
| Post subject: | Re: bent display prop fix |
Probably they would crack or break, contact a prop shop, tell 'em what you've got and got in mind and see if they will sell you some unservicable blades that have been rendered useless. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|