Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Sat Jun 07, 2025 11:58 am

View unanswered posts | View active topics


Board index » General Discussion » The WIX Hangar » RetroAviation Maintenance Hangar

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Killer Kane
PostPosted: Sun Nov 28, 2010 6:41 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 7:19 pm
Posts: 10
Location: Los Angeles
This is probably more of a "clean-up" than restoration, but anyway...

Recently acquired control wheel (eBay) after years of looking. However, it needs a little TCL before going on display. Appears to have white hard water marks and general grime on surfaces. I'm assuming wheel is made of a black bakelite material? Can I clean this surface with a vinegar/water solution? Also, what should I use to clean up metal surfaces?

Wheel is marked on back "SHELLER CK32C5833."

Image
Image
Image
Image
Top
 Profile  
 
tom d. friedman
PostPosted: Sun Nov 28, 2010 9:46 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Sun Oct 10, 2004 4:43 pm
Posts: 7501
Location: northern ohio
a good douche w/ a vinegar & water mixture & a soft to mild abrasive brush a number of times w/ good rinses in warm tap water will help plenty, dry thoroughly. it works, but results vary. that technique has never failed me regarding mildew, fungus etc on bakelite i.d. models, old canvas, & leather etc. do not use any solvent based material or bleach as this may toast your new find. a marine grade aluminum cleaner / polish will help the hub hole w/ an old tooth brush. clean off thoroughly & let dry. a good quantity of q tip swabs is good for applying the cleaner & rinsing / drying & will get in between the teeth of the hub. wipe off any cleaner from bakelite quickly, or mask off around the metal areas w/ masking tape. let me know how you do!!

_________________
tom d. friedman - hey!!! those fokkers were messerschmitts!! * without ammunition, the usaf would be just another flying club!!! * better to have piece of mind than piece of tail!!
Top
 Profile  
 
Killer Kane
PostPosted: Mon Nov 29, 2010 12:01 am 
Offline
User avatar

Joined: Wed Apr 04, 2007 7:19 pm
Posts: 10
Location: Los Angeles
Thanks for the detailed advice, Tom... I'll give it try!

Will give an update.
Top
 Profile  
 
Django
PostPosted: Wed Dec 01, 2010 3:15 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Thu May 18, 2006 3:08 pm
Posts: 4542
Location: chicago
Very cool. Best of luck. Do you have a center cap for it?

_________________
.
.
Sure, Charles Lindbergh flew the plane... but Tom Rutledge built the engine!

Visit Django Studios online or Facebook!
Top
 Profile  
 
Killer Kane
PostPosted: Thu Dec 02, 2010 12:02 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 7:19 pm
Posts: 10
Location: Los Angeles
Tom, your recipe worked like a charm... Django, below are pics of the cleaned up wheel with a vintage cap...
Image
Image
Image
Image
Top
 Profile  
 
tom d. friedman
PostPosted: Thu Dec 02, 2010 9:43 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Sun Oct 10, 2004 4:43 pm
Posts: 7501
Location: northern ohio
excellent results!! congrats!!!! looks like it got a great botox treatment!!! you've got a great keeper!! best, tom

_________________
tom d. friedman - hey!!! those fokkers were messerschmitts!! * without ammunition, the usaf would be just another flying club!!! * better to have piece of mind than piece of tail!!
Top
 Profile  
 
Django
PostPosted: Tue Dec 07, 2010 11:22 am 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Thu May 18, 2006 3:08 pm
Posts: 4542
Location: chicago
Wow, that looks great!! 8)

_________________
.
.
Sure, Charles Lindbergh flew the plane... but Tom Rutledge built the engine!

Visit Django Studios online or Facebook!
Top
 Profile  
 
b29flteng
PostPosted: Tue Dec 07, 2010 3:09 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Sun Feb 18, 2007 12:39 pm
Posts: 1817
Location: Irving, Texas
I'm filled with envy :)
Top
 Profile  
 
tom d. friedman
PostPosted: Tue Dec 07, 2010 4:05 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Sun Oct 10, 2004 4:43 pm
Posts: 7501
Location: northern ohio
tom d. friedman wrote:
excellent results!! congrats!!!! looks like it got a great botox treatment!!! you've got a great keeper!! best, tom






see!!! i'm not a total blithering idiot!! that remedy will work on many poorly stored, stained militaria. i've used it on early bakelite plastic, leather & canvas. it's mild on the material but gets the job done.

_________________
tom d. friedman - hey!!! those fokkers were messerschmitts!! * without ammunition, the usaf would be just another flying club!!! * better to have piece of mind than piece of tail!!
Top
 Profile  
 
Killer Kane
PostPosted: Wed Dec 08, 2010 1:50 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 7:19 pm
Posts: 10
Location: Los Angeles
Wow. Thanks for all the great comments. I actually used used an electric toothbrush along with Tom's hints. Worked surprisingly well.

Here are a few more pics:
Image
Image
Image
Image
Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » General Discussion » The WIX Hangar » RetroAviation Maintenance Hangar

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB® Forum Software © phpBB Group