Page 1 of 1
Flying wires
Posted: Sun Jul 18, 2010 10:53 pm
by stearmoth
Can anyone name me a source for optaining AN specification drawings for streamline flying wires?
Many tanks in advance, Hans
Re: Flying wires
Posted: Mon Jul 19, 2010 8:26 am
by Cvairwerks
Got the AN number? I can dive into IHS at work and check it.
Re: Flying wires
Posted: Mon Jul 19, 2010 3:11 pm
by stearmoth
Cvairwerks wrote:Got the AN number? I can dive into IHS at work and check it.
Here are the AN numers: AN671 ; AN673 ; AN674 ; AN675 ; AN676 ; AN677 and AN678
Would really appreciate yout hint! Thank you very much!
Hans
Re: Flying wires
Posted: Mon Jul 19, 2010 8:03 pm
by JDK
I know Bruntons in Scotland still manufacture the standard 'set' of Tiger Moth wires, and other flying wire material to order.
http://www.bruntons.co.uk/
Re: Flying wires
Posted: Tue Jul 20, 2010 2:09 am
by stearmoth
Yes, I know, however they don't make this documentation available. So, I am looking for another source of those drawings.
Thank you for the hint!
Hans
Re: Flying wires
Posted: Tue Jul 20, 2010 4:15 am
by JDK
No problem, I misread your original post!
Re: Flying wires
Posted: Tue Jul 20, 2010 8:18 am
by Cvairwerks
Hans: Got them printed off last night. Now I just need to scan them in on my system here at home and then I can email them to you. I don't know if I can get my scanner set up on this computer today or not. Send me a pm with your email address and if there is any limitations on file sizes.
Re: Flying wires
Posted: Tue Jul 20, 2010 10:45 am
by stearmoth
Cvairwerks wrote:Hans: Got them printed off last night. Now I just need to scan them in on my system here at home and then I can email them to you. I don't know if I can get my scanner set up on this computer today or not. Send me a pm with your email address and if there is any limitations on file sizes.
Hi, your help is most appreciated! 5 MB should not be a problem. My email address:
hans.u@aeroplaneworks.chKind regards
Hans
Re: Flying wires
Posted: Sun Jul 25, 2010 12:15 pm
by stearmoth
Hi Cvairwerks,
Didn't receive an email from you in the meantime! Did you you already try to send me one?
Would really appreciate those AN Fyling Wire spec. drawings!
Regards
Hans
Re: Flying wires
Posted: Sun Jul 25, 2010 5:08 pm
by Cvairwerks
Hi Hans: My weekend schedule got severely disrupted by family needs and I haven't been able to move the scanner to where I can use it. I should be able to get it moved and them scanned in the morning when I get home from work and then off to you. Bear with me a little longer.
Re: Flying wires
Posted: Mon Jul 26, 2010 3:34 pm
by Cvairwerks
Hans: I've got them scanned in but can't get them switched between computers until in the morning. Right now the file size is about 45 meg in .pdf form.
Re: Flying wires
Posted: Wed Jul 28, 2010 10:19 am
by Cvairwerks
Hans: I ended up rescanning them into individual files and sent them through an alternate email address that we have. You should have them any time now.
Re: Flying wires
Posted: Fri Nov 01, 2013 1:53 pm
by rguy23
I am trying to locate these same specs, AN streamline tie rods. If these are at all obtainable, I would be very appreciative... Thanks!
Re: Flying wires
Posted: Wed Nov 13, 2013 8:54 am
by pmahaffey
Re: Flying wires
Posted: Fri Dec 20, 2013 10:57 pm
by ProfromDover
Steen Aero Labs is a US rep for Bruntons. May be worthwhile to ring them up...
http://www.steenaero.com/Products/flying_wires.cfm