Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

PT rebuild - the hard way
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=33256		 Page 1 of 1
Author:  Mark D [ Thu Nov 26, 2009 9:18 am ]
Post subject:  PT rebuild - the hard way
Hi All

Thought folks would like to see the rebuild of a PT-19. This is going to be a large undertaking and it is a good time to see how one of these planes was built. We are pretty far into it but there is a long way to go. I will post some more photos as we go along if anyone is interested. Here we go.

These are the outer wing spars with the spar web removed. The webs came off pretty easy.
Image

Right now we are about half way through the wing/center section rebuild. These next couple of photos show our method of reconstruction. This way there is assurance that the flaps and ailerons line up.
Image
Image

Here are some details of the center section
Image
Image
Image
Image
Author:  N3Njeff [ Thu Nov 26, 2009 9:24 am ]
Post subject:  Re: PT rebuild - the hard way
OUTSTANDING MARK!!!!
Yes please keep posting as I know my friend will want to keep tabs on this. As you know right now he is on his way to pick up his PT from Rico.

I had to laugh 3 days ago cause I just realised that it was his BT project that I had been drooling over on barnstormers. Not that the family needs another BT.

Post some pics of yours when you get a chance.
Author:  sdennison [ Thu Nov 26, 2009 9:58 am ]
Post subject:  Re: PT rebuild - the hard way
Very cool Mark! I can't wait to see more. Thanks for sharing.

My best to your Pop. 8)
Author:  warbird_patrick [ Thu Nov 26, 2009 12:12 pm ]
Post subject:  Re: PT rebuild - the hard way
Looking good... great project

Patrick
Author:  Avn-Tech [ Thu Nov 26, 2009 8:20 pm ]
Post subject:  Re: PT rebuild - the hard way
Mark,

Looking good.
Do you have two PT's undergoing restoration (photo #1, appears to have two fuselages).

Once I get done with my Yak-52 & L-5 I am restoring, I have two PT-19's to do (3 center scetions).

Also when I get time, I need to check on printing the new IPB that I have written (like modern IPB's).
I also need to get the blueprint info and complete the parts interchange manual that is almost done.

Laterrrrrr
Avn-Tech
Author:  Mark D [ Fri Nov 27, 2009 10:32 am ]
Post subject:  Re: PT rebuild - the hard way
Yes

There are two - the PT-26 is on Barnstormers
Author:  Steven M. Dennis [ Fri Nov 27, 2009 2:01 pm ]
Post subject:  Re: PT rebuild - the hard way
Mmmmm, mmmmm, mmmmm! Delicious photos my friend!

Pay attention folks! Nobody does it better. Fairchild didn't even do it this good.

Hope you and yours had a Happy Thanksgiving Mark!

Steve :wink:
Author:  chippie51 [ Sat Nov 28, 2009 4:34 pm ]
Post subject:  Map Case for PT-19
We're after a couple of document/map cases for a PT-19, one for the front pit and one the rear. Does anyone know of any which may be available?

Thanks,

George
Author:  avenger2504 [ Sat Nov 28, 2009 5:39 pm ]
Post subject:  Re: PT rebuild - the hard way
wow those spars look in really great condition! She will be a fine example once completed!
Author:  henning [ Fri Dec 04, 2009 11:08 pm ]
Post subject:  Re: PT rebuild - the hard way
Very interesting shots Mark! Great stuff. Nice shots of the Spars and of all the framing.. never seen
anything quite like that before all stripped down. Looks like its coming along nicely. Looks like
you have some more room there in the new hangar? And the BT13 looks like its coming along nicely.
Need to come visit again one of these days when we get back out that way.

take care,

henning
Author:  N3Njeff [ Sun Jan 03, 2010 6:55 pm ]
Post subject:  Re: PT rebuild - the hard way
Mark, any updates on the PT and the BT?
Author:  Fleet16b [ Wed Jan 06, 2010 11:28 pm ]
Post subject:  Re: PT rebuild - the hard way
Guys

I have a fairly large large amount of Fairchild Cornel spares up here in Canada. Some came directly from the factory
If anyone is looking for items please p.m. me
The best way is to send me pics or drawings of what you need

Thanks
Author:  N3Njeff [ Sat Jun 05, 2010 7:32 pm ]
Post subject:  Re: PT rebuild - the hard way
Mark, any progress on this project???
Author:  Mark D [ Wed Jan 19, 2011 10:41 pm ]
Post subject:  Re: PT rebuild - the hard way
Hi All

I will be updating this and a few other things that have been going on around here in the last months of 2010

(I think Jeff may want to see the PT progress)


Mark D
Author:  N3Njeff [ Thu Jan 20, 2011 10:36 pm ]
Post subject:  Re: PT rebuild - the hard way
Yes I would!!!!! Was good hearing from you tonight, good timing as john was sitting there next to me. We chatted some more after and he wants to call you this weekend. I got to get to his barn, oh man does he have a collection going.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/