Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Auster T.6 Tugmaster VF608 - Left wing needed
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=31462		 Page 1 of 1
Author:  André [ Wed Aug 12, 2009 10:28 am ]
Post subject:  Auster T.6 Tugmaster VF608 - Left wing needed
Currently we're working at restoring Auster T.6 Tugmaster G-ASIP which served in the RAF between 1947 and 1961.
Former RAF registration VF608.

As we like to get her into RAF markings again I am wondering if members of these forums have information and /or photos which could help.

So far I managed to get some photos from the sixties showing the aircraft in civilian G-ASIP outfit but we hope to find some more from the early RAF service as well.

The aircraft records show that it served in the UK, Germany and even acted a UK Embassy flight in the Netherlands.

Besides photos we also are looking for a left wing. Currently we have 2 right wings so we could trade one if required.
Up what I understand if that either a T.6 or T.7 wing would aply.

Cheers, André Jans

Image
Image
Author:  The Inspector [ Wed Aug 12, 2009 10:11 pm ]
Post subject: 
The Auster was cloned from the Taylorcraft to more closely fit what the British military wanted so wouldn't a TCRAFT wing work?
Author:  André [ Wed Aug 12, 2009 11:22 pm ]
Post subject: 
The Inspector wrote:
The Auster was cloned from the Taylorcraft to more closely fit what the British military wanted so wouldn't a TCRAFT wing work?


I willing to check that. Thanks!

Not sure if it works though as there are many different Auster versions and not all have the same set of wings.

Until shortly there was an Auster forum in the UK but it shut down due to Spam attacks. Sadly.
Author:  rreis [ Thu Aug 13, 2009 3:01 am ]
Post subject: 
maybe you should contact Hérve da Silva (unless you already did), he just restored an Auster made under license at OGMA, in Portugal, to flight condition.

See:
http://forum.keypublishing.co.uk/showthread.php?t=86325
Author:  JDK [ Thu Aug 13, 2009 1:03 pm ]
Post subject: 
André wrote:
The Inspector wrote:
The Auster was cloned from the Taylorcraft to more closely fit what the British military wanted so wouldn't a TCRAFT wing work?


I willing to check that. Thanks!

Not sure if it works though as there are many different Auster versions and not all have the same set of wings.

I think by the Mk.6 version it was a lot beefed up and a long way from the Taylorcraft origin - but I'm no expert, worth checking.

André - why not ask on Plane Talk and Key Publishing? I know there are Austerers lurking at both...

http://forum.planetalk.net/index.php

http://forum.keypublishing.co.uk/forumd ... prune=&f=4
Author:  RyanShort1 [ Thu Aug 13, 2009 1:46 pm ]
Post subject: 
André wrote:
Until shortly there was an Auster forum in the UK but it shut down due to Spam attacks. Sadly.


They're always welcome to come to the Lbird forum... http://lbirds.forumotion.com/

Ryan
Author:  André [ Fri Aug 14, 2009 1:12 pm ]
Post subject: 
JDK wrote:
André wrote:
The Inspector wrote:
The Auster was cloned from the Taylorcraft to more closely fit what the British military wanted so wouldn't a TCRAFT wing work?


I willing to check that. Thanks!

Not sure if it works though as there are many different Auster versions and not all have the same set of wings.

I think by the Mk.6 version it was a lot beefed up and a long way from the Taylorcraft origin - but I'm no expert, worth checking.

André - why not ask on Plane Talk and Key Publishing? I know there are Austerers lurking at both...

http://forum.planetalk.net/index.php

http://forum.keypublishing.co.uk/forumd ... prune=&f=4


Already signed up at Key. Will try planetalk as well. Thanks.
Author:  André [ Fri Aug 14, 2009 1:17 pm ]
Post subject: 
rreis wrote:
maybe you should contact Hérve da Silva (unless you already did), he just restored an Auster made under license at OGMA, in Portugal, to flight condition.

See:
http://forum.keypublishing.co.uk/showthread.php?t=86325


Missed that one at Key. Thank you for bringing it up. Will send them an email. For some reason we mostly looked for parts in the UK but maybe a country like France might be an option as well. :idea:
Author:  JDK [ Fri Aug 14, 2009 8:48 pm ]
Post subject: 
André wrote:
Missed that one at Key. Thank you for bringing it up. Will send them an email. For some reason we mostly looked for parts in the UK but maybe a country like France might be an option as well. :idea:

Big Auster population in Aus, and a few in NZ, but shipping might be an issue!

Good luck, keep us posted.
Author:  André [ Sat Aug 15, 2009 2:03 am ]
Post subject: 
JDK wrote:
André wrote:
Missed that one at Key. Thank you for bringing it up. Will send them an email. For some reason we mostly looked for parts in the UK but maybe a country like France might be an option as well. :idea:

Big Auster population in Aus, and a few in NZ, but shipping might be an issue!

Good luck, keep us posted.


If you know any good part suppliers I would be grateful to hear from you.
If that's the way to get one we will have to look into it. :wink:
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/