| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| C-45 rocker box oil recovery question https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=31067 |
Page 1 of 1 |
| Author: | bluehawk15 [ Fri Jul 17, 2009 3:36 pm ] |
| Post subject: | C-45 rocker box oil recovery question |
Posted this in the hangar before. Got lots of looks, but no replies. Do any of you know of a STC approved Rocker box oil recovery valve/system for the C-45? |
|
| Author: | skymstr02 [ Fri Jul 17, 2009 5:28 pm ] |
| Post subject: | |
I haven't been able to find an STC for either P&W R-985 Series, Hawker Beechcraft 18, D-18, 3NM, C-45 series airplanes. I've seen airplanes with them, but doubtful if they are legal installations. |
|
| Author: | Matt Gunsch [ Fri Jul 17, 2009 7:19 pm ] |
| Post subject: | |
the valves I used to sell are legal installs with a field approval and a previously approved 337 as aproved data. There are a number of T-6s and C-45s that had the valves that Carl Schmieder made. If I can find a shop to make them for me that are affordable, I will try to get some done. |
|
| Author: | 51fixer [ Fri Jul 17, 2009 8:03 pm ] |
| Post subject: | |
Matt Gunsch wrote: the valves I used to sell are legal installs with a field approval and a previously approved 337 as aproved data. There are a number of T-6s and C-45s that had the valves that Carl Schmieder made.
If I can find a shop to make them for me that are affordable, I will try to get some done. Alden Engineering has a Rocker Oil Retrieval System that I have installed on a couple of T-6s under a STC. Titled RORS IIRC. I don't know if anything is advertised in NATA Skylines magazine. Rich |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|