Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
https://www.warbirdinformationexchange.org/phpBB3/

GBP /Cherry Cherry Max G-704 Rivet puller

https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=26308

Page 1 of 1

GBP /Cherry Cherry Max G-704 Rivet puller

Posted: Wed Dec 10, 2008 11:00 am
by Broken-Wrench
I have a cherry clone GBP 704 cherry max gun I havn't used in a while and I was wondering if it is typical if you have air coming out the exhaust port when pluged into shop air.. Not alot of air but a soft wisper.. The gun runs fine but it is anoying.. I can't remember if it did this prior to storage.. Is this typical?

Posted: Wed Dec 10, 2008 8:25 pm
by 262crew
Change out the air hose fitting on you puller and or air hose. If that doesent work oil your puller. If that doesn't work then there is a problem with the packing on the trigger, it maybe bypassing.
All times are UTC - 5 hours
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/