| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Wanted: Source for AN210 pulleys. https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=21019 |
Page 1 of 1 |
| Author: | pilot06 [ Fri Apr 04, 2008 11:23 pm ] |
| Post subject: | Wanted: Source for AN210 pulleys. |
I'm looking for a source for AN pulleys. Any help is greatly appreciated. Patrick |
|
| Author: | bdk [ Fri Apr 04, 2008 11:44 pm ] |
| Post subject: | Re: Wanted: Source for AN210 pulleys. |
pilot06 wrote: I'm looking for a source for AN pulleys. Any help is greatly appreciated. Lance has NOS, as does Banaire, and Aircraft Spruce has new.
Patrick http://www.banaire.com/pulleys.html |
|
| Author: | 51fixer [ Sat Apr 05, 2008 6:11 am ] |
| Post subject: | |
Try Preferredairparts.com, click on inventory search, type in the p/n and hit go. If they have them it will show up a list. Call them then to check price and order. They usually hsve good prices. Rich |
|
| Author: | pilot06 [ Sat Apr 05, 2008 6:31 pm ] |
| Post subject: | |
That reminds me, is there a real difference between the A & B pulleys? The goal is original NOS replacements without going to the MS pulley. Patrick |
|
| Author: | noizeedave [ Thu Apr 17, 2008 1:14 am ] |
| Post subject: | |
are you looking for the AN210-2A pullys? |
|
| Author: | pilot06 [ Thu Apr 17, 2008 11:32 am ] |
| Post subject: | |
I need NOS 3A's and 4A's. Patrick |
|
| Author: | Cvairwerks [ Sat Apr 19, 2008 6:52 pm ] |
| Post subject: | |
Pilot: The difference between A's and B's has to do with the bearing covers. A's have metal covers while B's have a composition covers. Functionality is the same for either version |
|
| Author: | pilot06 [ Sun Apr 20, 2008 11:53 am ] |
| Post subject: | |
CV, Thanks for the clarification. I'm trying to find Formica AN210's. Patrick |
|
| Author: | Cvairwerks [ Sun Apr 20, 2008 8:36 pm ] |
| Post subject: | |
You mean Micarta?. If so, then not a problem. The A-B difference is only with the dust shields for the bearings. Unless one can actually see the bearing while it is installed, and you are going for an "absolute" restoration, it really doesn't matter which you use. |
|
| Author: | pilot06 [ Mon Apr 21, 2008 11:08 am ] |
| Post subject: | |
CV, Correct, Micarta mnaufactured by Formica. All of the AN210 on my T-6 are from Formica. Patrick |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|